AR-15 Lower Completion Parts KitSolid Quality, Economically Priced, Everything You Need!Assemble these parts into an AR15 lower receiver and that receiver will be complete... All you will need to build the rest of your AR-15 is a stock, a barreled upper,...

Savage Barrel Nut Wrench Kit - Also fits Remington Remage Nut For removal and installation of rifle barrels on the Savage 10/110 series bolt action rifles and Remington 700 Remage bolt action rifles. Includes a double ended, notched barrel nut wrench...

ScopeRib III Sight System for Handgun SilhouetteReplacement hood for your ScopeRib III Sight System, used in handgun metallic silhouette competition. This is a 2.5" long tube, the same as that which comes with the ScopeRib III Sight System.  Note:...

Warne Maxima Scope Mounting Base for Savage Axis/EdgeWeaver Style, Low Profile, Tough and Solid  Warne Maxima Scope Bases are all steel, rigid and accurate one piece scope mounting bases. Finished in Matte Black to match the Warne Tactical Rings as...

Pac-Lite Fiber Optic Front Sight - Low GreenTactical Solutions low front sight fits Pac-Lite and Ruger Lite barrels.  Height is .365"

T/C Encore 20 MOA Scope BaseAdds 20 Minutes Of Angle for Long Distance Shooting- Here's how it works: This Encore 20 MOA scope base adds 200 inches of elevation at 1000 yards. A typical scope that adjusts ¼" per click at 100 yards takes about 80 clicks...

Hogue 10-22 Takedown Stock  The success of Ruger’s takedown 10-22 gave us an opportunity to bring something new to the party in OverMolded® stocks. We've introduced a traditional “Sporter” style takedown rifle stock –...

Hogue 10-22 Takedown Thumbhole Tactical Stock  The success of Ruger’s takedown 10-22 gave us an opportunity to bring something new to the party in OverMolded® stocks. We've introduced a “Tactical Thumbhole” model featuring a futuristic...

Magpul PMAG 10 Round AR-15/M4 Gen M3 .223 Rem/5.56X45 NATO MagazineTrue 10-round capacity that does not require limiters, pins, rivets, etcNext Gen impact and crush resistant polymer constructionWide compatibility with non Colt-spec platformsAnti-tilt...

Hi-Viz 4.5" Fiber Optic Front Sight for the LLV/Scorpion Screws on to 4.5" Volquartsen LLV and Scorpion Uppers. These drop-in sights use existing pre-drilled & tapped holes. Mounting Screws included.

Ruger 10/22 BX-Trigger System  This is a Ruger factory replacement trigger with an improved trigger pull. Fits any Ruger 10/22 (Takedown included!) or 22 Charger. Delivers a light, crisp 2.5-3.0 lb trigger pull with minimal overtravel and positive...

Volthane Grips for Ruger the Ruger Mk III PistolFamous "Volthane" grips by Volquartsen fit the Ruger Mk III (will not fit the 22/45 models). Designed to position your hand exactly the same every time you grip the pistol, these grips are an aid to...

LOCKER Hinge Pin for TC Encore and Pro Hunter  The Accuracy Locker Hinge Pin replaces your factory hinge pin with no modifications to your frame or barrel. It simply tightens into place so there is no rotation nor drifting from side to side. The...

Ruger Mk II/III 22/45 Magazine Bumper Pads...Dump Your Empty Mag, Then "BUMP" One of These for Fast, Secure Reloads!   Made by economical molded plastic construction, the 22/45 magazine base bumper pad looks and functions just like the ones...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

Ruger MKII Hammer Bushing by Volquartsen  This MKII Hammer Bushing is precision manufactured by "Swiss" screw machine equipment. The hammer pivot pin hole has been drilled & reamed for improved precision to help eliminate variances (wobble or...

Volquartsen 10/22 Stock Take-Down Screw  This is a precison Allen Head stock screw for your Ruger 10/22 Stock. The Allen head serves two purposes. First, it doesn't get buggered up like slotted head screws. Second, it fits torque wrenches so you can...

Fits Tactical Solutions Pac-Lite Barreled Uppers for Ruger MK Series Pistols. Please note: This base will not work on Factory Ruger Mk Series Pistols as the thread pitch is different for factory base screws.

EABCO Ruger 10/22 Scope MountPrecision Machined Weaver Style Scope Mounting Base Black  Our EABCO Ruger 10/22 Scope Mounting Base is precision machined to optimize the base for the very best ring engagement, alignment, and rigidity. No molding or...