E. Arthur Brown Co

Thread Protector, 1/2 x 28 tpi, .740″ dia, .625″ Long, Stnls This .740 diameter thread protector 1/2x28 tpi thread is machined from US made steel to very high quality standards on CNC lathes. It is counter bored to accommodate barrels that...

350 Legend Blue TC Encore Accuracy Barrel® - 26" Match Grade by EABCO Unlock the full potential of your TC Encore or Pro Hunter with our 350 Legend Blue TC Encore Accuracy Barrel®. Expertly crafted with a 1:14 twist rate, these 26" match-grade...

Savage Metal Trigger Guard Replacement fits 10/110 SeriesMetal Trigger Guard Replacement Features a Thinner Front Section for Better Fit in Some Installations- Sometimes you just need a new trigger guard... Such as when you are replacing the bottom metal...

Remington 700 Accuracy Barrel® 6mm Creedmoor 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Barrel Shims fit T/CR22 and Ruger 10/22 Barrels- Our Barrel Shims for the Thompson Center T/CR22 Rifle allow you to mount ANY Ruger 10/22 compatible replacement barrel onto your T/CR22* Just slip the shims onto the barrel shank. Mount the shank into your...

AR15 Tungsten Buffer Weights 3-Pack- It's easy to fine tune your bolt speed for optimum performance and reliability using our Tungsten Buffer Weights. Your AR15 recoil buffer has three STEEL weights inside. You simply replace the steel weights with EABCO...

Savage Long Action Plastic Magazine Well Molded Plastic "Bottom Metal" for Detachable Mag Long Action Stocks  This magazine well fits magazines where the latch is part of the magazine. If your Savage rifle has a plastic stock with the magazine well...

By Popular Demand...M1 Carbine Sight Set for Ruger 10/22 Rifles- Replica M1 Carbine sights made to fit the Ruger 10/22. Fully functional windage and elevation adjustment. Rear sight fits 10/22 scope mounting holes. Front sight slips over the front sight...

Blue TC Encore Accuracy Barrels® by EABCO17 Remington Fireball 1:9, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Blue TC Encore Accuracy Barrels® by EABCO308 Winchester 1:12, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. The 1:12 rifling twist on this barrel is best suited to the 155 grain match...

Blue TC Encore Accuracy Barrels® by EABCO308 Winchester 1:8, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. The 1:8 rifling twist on this barrel is best suited to heavy bullets (190-220gr)...

Blue TC Encore Accuracy Barrels® by EABCO308 Winchester, 1:10, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. The 1:10 rifling twist on this barrel is best suited to most common 308 Win...

Blue TC Encore Accuracy Barrels® by EABCO6.5mm BRM 1:8, Standard Model, Match Grade Barrels Ready Made 6.5 BRM stands for 6.5 Bench Rest Magnum. It's a rimmed wildcat cartridge derived from an elongated and necked up 219 Donaldson Wasp (219 DW was...

Blue TC Encore Accuracy Barrels® by EABCO223 Remington 1:12, Standard Model, Match Grade Barrel TC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

TC Encore Underlug Spring Roll Pin Kit- Replacements for the spring pins used in the underlug assembly of Thompson Center Encore and Pro Hunter barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Black (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One...

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Stnls (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One for...

Savage Accuracy Barrel® 243 Winchester 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles243 Win uses a 308 Win Bolt Face26" length, weight approx 4lbsVarmint weight tapered to just under .800" diameter at...

Savage Accuracy Barrel® 6mm Creedmoor 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles6mm Creedmoor uses a 308 Win Bolt Face26" length, weight approx 4lbs 7.8ozVarmint weight tapered to just under .800"...

Picatinny Rail Scope Base for TC Contender/G2 Fits TC Contender and G2 barrels. This new mount fits TC Contender and G2 barrels, and provides milspec Picatinny mounting compatibility for your Original Contender/SSK-50 and/or G2 barrels. It fits the...