E. Arthur Brown Co

T/C Encore 35 Whelen Extractors are Tool Steel by EABCO   The 35 Whelen extractor is used for TC Encore and Pro Hunter barrels chambered in 35 Whelen. Our extractors are precision machined from tool steel billet. We...

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...

Savage Accuracy Recoil Lug - Matte Black Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

Savage Barrel Lock Nut Lock nut to secure barrel to receiver. Screw the barrel in to set headspace, then tighten the lock nut. Precision machined to close tolerances for optimal fit, alignment, and concentricity. This nut features squared grip notches to...

Encore Tool Steel Locking Bolts by EABCO- Precision machined tool steel barrel locking bolts for TC Encore and Pro Hunter barrels. 2014 was a worrisome time of shortages in the gun industry. We tooled up to machine these excellent locking bolts from tool...

Composite Forend for TC Encore Pro Hunter Rifle Barrels - Black Upgrade your TC Encore or Pro Hunter rifle with this versatile Composite Forend. Designed to adapt and flex to fit the barrel contours of 24", 26", and 28" barrels, this forend combines...

Custom Forend fits G1 and G2 Contender Carbine, Walnut, Bull Barrel- Modified G2 Style Walnut Bull Forend fits the Original Contender/SSK-50 Carbine Length with non-tapered (bull) barrels as well as the G2 Contender with non-tapered bull barrels. Screw...

Custom Modified Contender and G2 ForendModified G2 Style Composite Bull Forend fits the Original Contender/SSK-50 Carbine with non-tapered (bull) barrels as well as the G2 Contender with non-tapered bull barrels. Screw hole spacing approx. 3 9/16"...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Oversized Ruger 10/22 Bolt Handle Assembly This is a standard weight oversized bolt handle assembly for the Ruger 10/22 to be used when firing 22LR ammunition. Oversized handle is much easier to grip than factory handle and looks nicer...

Magnum Slimline Muzzle Brake Blue Installed Includes Custom Installation - Aligned to Your Barrel and Bore Includes 11 Degree Target Crown - Enhances Accuracy Potential Reduces Felt Recoil Approximately 42-45% on Up To .45 Caliber Expansion Chamber...

  Taco Hood for the Bond Front Sight used in handgun metallic silhouette competition. This is a 5" long tube that replaces the original short Bond hood-tube. Note: This is only the hood... It fits on your Bond Front Sight.

Hicks Ruger Number One Accurizer  Adjusts harmonics to achieve the accuracy sweet spot for your Ruger No.1. The main spring hanger bar that extends out under the barrel from the Ruger #1 receiver can be turned into a harmonic accuracy...

  These are the standard forend screws that fit Encore 24 and 26 inch barrels as well as Prohunter 28 inch barrels. New forends include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer the ...

Originally developed for the military, the OPS Muzzle Brake is the result of extensive research into muzzle gases and the effects of redirecting them for recoil reduction and accuracy enhancement. Excellent for big game as well as varmint cartridges (...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends   All the hardware needed to attach the Encore Laminate or Factory Walnut Muzzle Loader forend. Includes the leaf spring rod retainer with screw, and...

TC Original/SSK-50 and G2 Pistol Forend for 14" Pistol barrels- Black. Rubber  Modified to fit both the Original & G2 Style Contender with non-tapered bull barrels. This one is for 12-14" barrels. Screw hole spacing approx. 3 1/8".  It is a...

EABCO Ruger 10/22 Match Grade Accuracy Barrel - 18" Blued, Threaded Our EABCO Threaded 10/22® Accuracy Barrels® have threaded 1/2x28 muzzles to fit Muzzle Brakes and suppressors. Custom thread protectors are included... Order muzzle brakes...