E. Arthur Brown Co

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

Standard AR15 A2 Flash HiderScrews on to your threaded barrel. 1/2x28 tpi. Overall length approximately 1.75 inches. Also works great as a thread protector.  

Savage Accuracy Recoil Lug - Matte Black Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

Savage Barrel Lock Nut Lock nut to secure barrel to receiver. Screw the barrel in to set headspace, then tighten the lock nut. Precision machined to close tolerances for optimal fit, alignment, and concentricity. This nut features squared grip notches to...

T/C Encore 308 Extractors are Tool Steel by EABCO   The "308" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 BR, 22-250 Rem, 6mm BR, .308 Win, 7-08 Rem, 243 Win, 260 Rem, 6.5x47 Lapua, 6.5 Creedmoor, 30-06, 25-06,...

Encore Tool Steel Locking Bolts by EABCO- Precision machined tool steel barrel locking bolts for TC Encore and Pro Hunter barrels. 2014 was a worrisome time of shortages in the gun industry. We tooled up to machine these excellent locking bolts from tool...

Composite Forend for TC Encore Pro Hunter Rifle Barrels - Black Upgrade your TC Encore or Pro Hunter rifle with this versatile Composite Forend. Designed to adapt and flex to fit the barrel contours of 24", 26", and 28" barrels, this forend combines...

Custom Modified Contender and G2 ForendModified G2 Style Composite Bull Forend fits the Original Contender/SSK-50 Carbine with non-tapered (bull) barrels as well as the G2 Contender with non-tapered bull barrels. Screw hole spacing approx. 3 9/16"...

Subsonic 10/22 22LR Accuracy Barrel® Blue (.920)   Our EABCO Threaded 10/22 Accuracy Barrels® have threaded 1/2x28 muzzles to fit Muzzle Brakes and Suppressors. Custom thread protectors are included, order muzzle brakes separately. This...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to fit. The wood screw stud usually goes in the...

Single Shot Followers for Popular Rifles WHY Use a Single Shot Magazine Follower? - For best accuracy potential, bullet seating depth should be dictated by the length of your chamber, not your magazine. Our Benchrest Followers convert your bolt action...

AR-15 A1 Stock Screw A1 buttstock screw with the vent hole down the middle. Length approx 1/2 inch. E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Custom Forend fits G1 and G2 Contender Carbine, Walnut, Bull Barrel- Modified G2 Style Walnut Bull Forend fits the Original Contender/SSK-50 Carbine Length with non-tapered (bull) barrels as well as the G2 Contender with non-tapered bull barrels. Screw...

 8-40 thread Stainless Plug Screws for front sight holes on Thompson Center Muzzleloaders. These screws work on the following TC Muzzleloaders; Encore, Encore Pro Hunter, Black Diamond, Omega and Tiumph. If you need blue plug screws, please click...

8-40 Plug Screws Blue (Pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 8-40 thread Blue Plug Screws fit the  front sight holes...

Black Nitride AR10/LR-308 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 308 Win, 6.5 Crd, 7.62 NATO, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for the excellent durability and...

Bull Barrel Thread Protector 5/8 x 24 tpi 1.00″ dia, 5/8″ Long, Stnls The Bull barrel thread protector 5/8 x 24 tpi thread is machined from US made steel to very high quality standards on CNC lathes. It is counter bored to accommodate barrels...