E. Arthur Brown Co

T/C Encore 30-30 Extractors are Tool Steel by EABCO   The "30-30" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits 30-30 Win, 7-30 Waters, 30 Herret, 6.5mm BRM, 30-30 Ackley Improved, 6mm BRM, 375 Win, 7mm...

T/C Encore 223 Extractors are Tool Steel by EABCO   The "223" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits .223 Rem, 5.56 Nato, 300 Blackout, 221 Fireball, .222 Rem, 17 Fireball, 17 Mach IV, 7mm TCU, 204...

Savage Accuracy Barrel® 243 Winchester 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles243 Win uses a 308 Win Bolt Face26" length, weight approx 4lbsVarmint weight tapered to just under .800" diameter at...

Savage Accuracy Barrel® 6mm Creedmoor 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles6mm Creedmoor uses a 308 Win Bolt Face26" length, weight approx 4lbs 7.8ozVarmint weight tapered to just under .800"...

Picatinny Rail Scope Base for TC Contender/G2 Fits TC Contender and G2 barrels. This new mount fits TC Contender and G2 barrels, and provides milspec Picatinny mounting compatibility for your Original Contender/SSK-50 and/or G2 barrels. It fits the...

6.5mm BRM Brass Sampler (5 pcs)Five pieces of our custom 6.5mm BRM Brass that you can use to test fit and test load in your 6.5mm BRM firearm. If it fits and works, you can then order the full bag of 50. Custom, fully formed reloading brass for 6.5mm BRM...

Stainless TC Encore Accuracy Barrels® by EABCO308 Winchester 1:10, Standard Model, Match Grade Barrels Ready MadeTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention...

Stainless TC Encore Accuracy Barrels® by EABCO6.5mm BRM, Standard Model, Match Grade Barrels Ready Made 6.5 BRM stands for 6.5 Bench Rest Magnum. It's a rimmed wildcat cartridge derived from an elongated and necked up 219 Donaldson Wasp (219 DW was...

Ruger Mk I, II, III HSS Ease-Of-Assembly Upgrade- The HSS (Hammer Strut Support) is a parts upgrade that greatly improves the ease of assembly for Ruger MK I,  II, and III pistols (It DOES NOT fit ANY 22/45, nor ANY Mk IV). It simply eliminates the...

Cut and Recrown 11 degree Target Crown Our expert gunsmiths take care and detail with each barrel they work with.  Accuracy is a priority, so proper cut and recrown requires proper centering and alignment. The crown of a barrel is is extremely...

EABCO Picatinny Scope Mount fits Savage Axis, Axis II, and EdgeA true Picatinny spec scope base for the Axis that's precision machined like a Benchrest mount. Based on our world famous, Keylock® design, this scope base is precision machined for...

AR10/308 Lower Parts Completion Kit   All the internal parts needed to complete a stripped lower AR10/308 receiver. DPMS compatible and all manufactured in the USA under strict quality control standards. Here's what's included: Front Pivot Pin ...

Bond Hooded Front Silhouette Sight by EABCO- Original Ralph Bond designed IHMSA Silhouette front sight manufactured by EABCO has a front post that's adjustable for width and height with a removable one inch tubular hood. This is the same sight that we...

AR15 MilSpec Buffer Tube Kit  Complete buffer tube parts kit for mounting M4 MilSpec style collapsible butt stocks on an AR15 firearms. See the photos for comparison of Commercial vs. MilSpec styles... This kit fits butt stocks made...

AR15 Commercial Buffer Tube Kit  Complete buffer tube parts kit for mounting M4 Commercial style collapsible butt stocks on an AR15 firearm. See the photos for comparison of Commercial vs. MilSpec styles... This kit fits butt stocks made to...

T/C Encore 300 Win Mag Extractors are Tool Steel by EABCO   The 300 Win Mag extractor is used for TC Encore and Pro Hunter barrels chambered in 300 Winchester Magnum and 7mm Remington Magnum. Our extractors are precision machined...

T/C Encore 35 Whelen Extractors are Tool Steel by EABCO   The 35 Whelen extractor is used for TC Encore and Pro Hunter barrels chambered in 35 Whelen. Our extractors are precision machined from tool steel billet. We...

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...