Ruger Mark II®

Ruger® Brand Magazines for Mk II and MK I Pistols Genuine Ruger factory 9 Round magazines for your Ruger Mark I and Mark II Pistols.  Note, this does not fit the 22/45 versions.

Extended Bolt Release for Ruger MK II and Mk III (Not 22/45) Convert your Ruger Mk II or Mk III bolt release to a convenient thumb tab that works just the the bolt release on a 1911 (Note: Does not fit 22/45 models). 

McFadden Ultimate Clip Loader for Ruger Mk II/III/IV Pistols-The Ultimate Clip Loader is for speed loading Ruger Mk II, III, IV, and 22/45 Magazines. Load the hopper with up to 50 rounds of 22 ammo. Shake the loader to align the shells. Then just slip...

Hogue MKII/MKIII & 22/45 OverMolded Rubber Grip Finger Grooves Durable synthetic rubber, perfect for recoil absorbing without affecting accuracy.  Modern molding process and flexibility of materials results in superior grips that out perform...

Adjusts for High or Low Velocity AmmoVolquartsen Recoil Rod and Spring Kit- Provides the best spring tension for reliable function with high or low velocity ammo. This innovative design makes it quick and easy to match your spring weight to your ammo of...

Ruger Mk I, II, III HSS Ease-Of-Assembly Upgrade- The HSS (Hammer Strut Support) is a parts upgrade that greatly improves the ease of assembly for Ruger MK I,  II, and III pistols (It DOES NOT fit ANY 22/45, nor ANY Mk IV). It simply eliminates the...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

LCI Filler for Ruger Mk III and 22/45 Steel Filler Replaces the Loaded Cartridge Indicator (LCI). • Can reduce misfeeding and ejection problems • Simplifies cleaning of chamber area • Improves exterior aesthetics • Made of Steel (not plastic) ...

Maximus Plus1 Followers for Ruger® MK Series Magazines (2-PACK)- Replacement magazine followers that increase magazine capacity from 10 rounds to 11 rounds. The TANDEMKROSS “Maximus” Plus1 Follower for the Ruger® MK series is a drop-in upgrade...

Mark IV™, Mark III™ & 22/45™ Picatinny Rail Factory 1913 style picatinny rail for Mark IV™, Mark III™ and 22/45™. Rail fits firearms with factory pre-drilled receivers. Includes three screws. (Does not fit Mark I and Mark II™ pistols.) Genuine...

Patridge style target sight fits on 4.5'' Volquartsen LLV (Mk II/III) and LLV4 (Mk IV) Competition Pistol Uppers.

Ruger MK I, II, III, and 22/45 Performance Pak - Springs Extra Power Recoil Spring Extra Power Firing Pin Spring Reduced Power Hammer Spring Reduced Power Trigger Spring Fit: Ruger Mark I, II, III, and 22/45 Upgrading your Ruger pistol with these...

Ruger Mark IV Pistol Trigger Shims These trigger shims fit Ruger Mark I, II, III, IV & 22/45 Pistols. They install on the Left Side of the Trigger, between the Trigger and the #AN37 Bolt Stop Assembly. Installing a Shim here will stop the Trigger...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. - The Exact...

"Green Springs" Magazine Springs for Ruger® MK Series (3-PACK)Shot-peened spring offers longer life than factory springReduces failure-to-feed issuesReplaces old, broken mag springsUpgrade your Ruger® MK series magazines with aftermarket...

Tandemkross Mark III (22/45) Hammer Bushing for Magazine Disconnect-Stainless SteelCompatibility: MKIII -ALL MODELS MKIII 22-45 MKIII 22-45 Competition MKIII 22-45 Government Target MKIII 22-45 Target MKIII Competition MKIII Government Target MKIII...