Ruger Mark III

Halo Charging Ring for Ruger® Mk III/Mk IV® & 22/45   The Halo is an easy to grip "pull ring" that attaches to your Ruger Mk III/Mk IV bolt. It makes it easy to pull the bolt back for anyone... Big or small, strong or weak...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. The Exact...

Tandemkross Mark III (22/45) Hammer Bushing for Magazine Disconnect-Stainless SteelCompatibility: MKIII -ALL MODELS MKIII 22-45 MKIII 22-45 Competition MKIII 22-45 Government Target MKIII 22-45 Target MKIII Competition MKIII Government Target MKIII...

Game Changer Rimfire Compensator  The Game Changer has gas ports on the top and sides so it stabilizes the muzzle and virtually eliminates muzzle rise. With no ports on the bottom, it's important to mount the game changer with the ports...

Hogue MKII/MKIII & 22/45 OverMolded Rubber Grip Finger Grooves Durable synthetic rubber, perfect for recoil absorbing without affecting accuracy.  Modern molding process and flexibility of materials results in superior grips that out perform...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

McFadden Ultimate Clip Loader for Ruger Mk II/III/IV Pistols-The Ultimate Clip Loader is for speed loading Ruger Mk II, III, IV, and 22/45 Magazines. Load the hopper with up to 50 rounds of 22 ammo. Shake the loader to align the shells. Then just slip...

Main Spring Assemblies for Ruger Mk II, IIIPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II and III version differs from 22/45 version due to grip angle difference in the...

Extended Bolt Release for Ruger MK II and Mk III (Not 22/45) Convert your Ruger Mk II or Mk III bolt release to a convenient thumb tab that works just the the bolt release on a 1911. Made by Majestic Arms. (Note: Does not fit 22/45 models).  E...

Volquartsen Assembled Lower Frame for Ruger Mark II, Mark III, 22/45A Completely Assembled Lower Frame Replacement... Includes Volquartsen Accuracy System Internal Parts  Our Volquartsen Custom 1911 Style Frame is CNC machined from aluminum alloy...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Picatinny Rail for Ruger MK IV This rail can be mounted in two directions, allowing the rear sight to stay mounted; when reversed, it will cover the rear sight dovetail. Fits factory Ruger MKIII and MK IV uppers. Mounts in Two Directions Fits Ruger MKIV...

Bolt Tune Up Kit for Ruger MKII, MKIII, MKIV, and 22/45 Improve the reliability of feeding, firing, and ejecting on your pistol... Eliminate light strikes and stovepipes. This very simple upgrade, replaces the mass production stamped sheet metal parts in...

Pistol Competition Kit, MKIII, Gold Flat Trigger The Volquartsen Pistol Competition Kit for your Ruger Mark III is an upgrade on top of an upgrade on top of an Upgrade. It starts with the original Mark III Acurrizing Kit. A Bolt Tune Up Kit is added...

Lowey Barrel Tuner 1/2x28 - The tuner is an adjustable muzzle weight. With it, you can precisely adjust the location/position of the weight to optimize the harmonics of your barrel and ammunition. The mounting body fits any pre-threaded 1/2x28 muzzle...

Ruger Mark IV Pistol Trigger Shims These trigger shims fit Ruger Mark I, II, III, IV & 22/45 Pistols. They install on the Left Side of the Trigger, between the Trigger and the #AN37 Bolt Stop Assembly. Installing a Shim here will stop the Trigger...

Scorpion Frame fits All Ruger MKII and MKIII Barrels Hogue Grips No FFL Required... Order and take delivery personally! All Aluminum Lower Frame for Ruger Mark II, III, and 22/45 Completely Assembled w/Volquartsen Competition Parts Drop-In Ready.....

Ruger MK IV™ / MK III™ Magazines, 10-Round, Nickel, 2-Pack- 2-Pack (two) steel, 10-round, .22 caliber magazine for the Ruger® Mark IV™ and Mark III™ pistols. New Electroless Nickel finish is super slick. Fits, feeds, and functions better than blue...