TC Encore Parts

T/C Encore 6.8 Rem SPC Extractors are Tool Steel by EABCO   The 6.8 Rem SPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6.8 Rem SPC as well as 224 Valkyrie. Our extractors are precision machined from tool steel billet...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

TC Encore Pro Hunter Pistol Case Black  Designed and dimensioned specifically to fit the Encore handgun with barrels up to 15" length - even when scoped. Includes two inside pockets for extra barrels. Padded and lined to provide maximum protection...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pin  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision ground "drill rod" to fit closely for accuracy...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pins  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision ground "drill rod" to fit closely for accuracy...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* Heavy Duty Hammer Spring - Gives More Reliable Primer...

TC Encore Breech Plug Wrench for Original Encore Speed Breech We are excited to offer new to our loyal TC customers! Scheduled Q2 Launch - New Thompson Center Production   E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* SPEEDLOCK Hammer Spring - Gives More Reliable Primer...

TC Encore ProHunter and Triumph Breech Plug XT Wrench Speed Breech TX breech plug - 90 degree turn and out - by hand. We are excited to offer new to our loyal TC customers! Scheduled Q2 Launch - New Thompson Center Production   E. Arthur Brown...

Universal Shotgun Forend Screw Set for Encore and Pro HunterT/C Shotgun forends use slightly different screws for 20 ga. and 12 ga. If you have lost one or both screws, this kit will get you back up and running. This kit includes one shorter screw 0.75",...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends   All the hardware needed to attach the Encore Laminate or Factory Walnut Muzzle Loader forend. Includes the leaf spring rod retainer with screw, and...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Thread Protector fits Large Caliber 11/16 x 24 Blued (Black) Beautiful knurled blued thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC ProHunter large caliber barrels (over 30 cal) like the 360...

Thread Protector fits Large Caliber 11/16 x 24 Stainless  Beautiful knurled stainless thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC ProHunter large caliber barrels (over 30 cal)  

TC Encore Pro Hunter Headspace Shims Headspace is the distance from head of a cartridge to the breech face. You can fine tune the headspace of your Encore or Pro Hunter with these "shims". The SAAMI specified headspace allows up to .010" of variance in...

TC Encore Pro Hunter Firing Pin - S7 Steel Firing pins can sometimes chip or break and you have to replace them. These new "S7" firing pins are an improvement. The S7 steel can be tempered so it is both hard and tough... Making these firing pins more...

T/C Encore and Pro Hunter Barrel Hinge Pin, StnlsThis stainless steel barrel hinge pin is a direct replacement the Thompson Center Encore and Pro Hunter hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal...

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa with synthetic. One of them will fit to...