Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

Thread Protector AR-10 Heavy Profile 5/8X24 Stainless- Protect and beautify your Heavy Profile AR-10 muzzle threads with this beautiful knurled stainless thread protector. Standard 5/8X24 thread with a length of .625 inch and .930" diameter, it fits...

Ruger 10/22® Competition Trigger Kit by Power Custom - A professional action tune-up for your Ruger 10/22 that you can afford... and you can  "do-it-yourself". - Includes every important part from the insides of an expensive modular trigger...

Shaw Barrel Nut Wrench - Fits Savage and Remage Barrel Nuts.Shaw Barrel Nut Wrench for Savage 10 and 110 series bolt action rifles. Take a look at these features: Fits Savage Barrel Nuts Also Fits Remage Barrel Nuts Totally Stainless... So that...

Replacement screw for CVA Peeprib part #127-813.

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...

T/C Contender 30-30 Winchester Extractors are Tool Steel by EABCOThese 30-30 Winchester extractors are used for TC Contender and G2 Contender barrels that are chambered for the 30-30 Winchester cartridge. Our extractors are precision machined from tool...

T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...

T/C Contender 357 Magnum Extractors are Tool Steel by EABCOThese 357 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 357 Magnum, 357 Maximum, 38 Special, 7mm SuperMag, and any other cartridges that have the...

T/C Contender 22 Hornet Extractors are Tool Steel by EABCOThese 22 Hornet extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Hornet cartridge. It also works with many other cartridges that have the same rim. Our...

T/C Contender 6.8 Remington SPC Extractors are Tool Steel by EABCOThese 6.8 Rem SPC extractors are used for TC Contender and G2 Contender barrels that are chambered for the 6.8 Remington SPC cartridge. It also works with other cartridges that have the...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

T/C Contender 35 Remington Extractors are Tool Steel by EABCOThese 35 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 35 Remington cartridge. Our extractors are precision machined from tool steel billet...

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...

Choate Short Bipod Adaptor/Swivel Stud  A shorter, lower bipod adapter that fits the forend rail of our Sniper, Varmint and Tactical stocks, lets you install a Harris bipod so that it tightens against the forend so there is not side to side movement...

Extended Bolt Release for Ruger MK II and Mk III (Not 22/45) Convert your Ruger Mk II or Mk III bolt release to a convenient thumb tab that works just the the bolt release on a 1911. Made by Majestic Arms. (Note: Does not fit 22/45 models).  E...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to fit. The wood screw stud usually goes in the...

  These are the standard forend screws that fit Encore 24 and 26 inch barrels as well as Prohunter 28 inch barrels. New forends include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer the ...