AccuWasher Gen 2 Muzzle Device Alignment The AccuWasher® Gen 2 Muzzle Device Alignment System is the ultimate solution for precise and repeatable muzzle device alignment. Unlike traditional crush washers, this mono-shim system is precision...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

Thread Protector AR-10 Heavy Profile 5/8X24 Stainless- Protect and beautify your Heavy Profile AR-10 muzzle threads with this beautiful knurled stainless thread protector. Standard 5/8X24 thread with a length of .625 inch and .930" diameter, it fits...

Ruger 10/22® Competition Trigger Kit by Power Custom - A professional action tune-up for your Ruger 10/22 that you can afford... and you can  "do-it-yourself". - Includes every important part from the insides of an expensive modular trigger...

Shaw Barrel Nut Wrench - Fits Savage and Remage Barrel Nuts.Shaw Barrel Nut Wrench for Savage 10 and 110 series bolt action rifles. Take a look at these features: Fits Savage Barrel Nuts Also Fits Remage Barrel Nuts Totally Stainless... So that...

Replacement screw for CVA Peeprib part #127-813.

Volquartsen Exact Edge Extractor for Remington 870 and 1100The Exact Edge Extractor is manufactured through an EDM process (not an inferior MIM process) to produce exacting tolerances. The new extractor will not lose its edge under impact like...

Harris Bipods #3 Adapter fits Remington 4, 74, 7400The #3 Bipod Adapter creates a solid swivel stud bipod mounting point on Remington semi-automatic rifles. Attaches at the end of the forend, replaces the forend screw. E. Arthur Brown Company, Inc4088...

Extended Bolt Release for Ruger MK IV (Not 22/45)This part gives a larger, grippier surface for your thumb to engage the Ruger Mark IV bolt release. Releasing the bolt after a magazine change takes less effort and becomes more natural. It's especially...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...

T/C Contender 30-30 Winchester Extractors are Tool Steel by EABCOThese 30-30 Winchester extractors are used for TC Contender and G2 Contender barrels that are chambered for the 30-30 Winchester cartridge. Our extractors are precision machined from tool...

T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...

T/C Contender 22 LR Extractors are Tool Steel by EABCOThese 22 LR extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 LR cartridge. Our extractors are precision machined from tool steel forging. We install these...

T/C Contender 357 Magnum Extractors are Tool Steel by EABCOThese 357 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 357 Magnum, 357 Maximum, 38 Special, 7mm SuperMag, and any other cartridges that have the...

T/C Contender 22 Hornet Extractors are Tool Steel by EABCOThese 22 Hornet extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Hornet cartridge. It also works with many other cartridges that have the same rim. Our...

T/C Contender 6.8 Remington SPC Extractors are Tool Steel by EABCOThese 6.8 Rem SPC extractors are used for TC Contender and G2 Contender barrels that are chambered for the 6.8 Remington SPC cartridge. It also works with other cartridges that have the...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

Oryx Sling Swivel Stud Assembly- Original Self Threading Swivel stud that screws into the existing forend hole on older Oryx Chassis forends. New Oryx chassis will need a backing nut to attach this stud to the forend hole. For use in sling attachment as...

T/C Contender 35 Remington Extractors are Tool Steel by EABCOThese 35 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 35 Remington cartridge. Our extractors are precision machined from tool steel billet...