Ruger MKIV Frame Lug This lug is precision machined for improved fit. Slight variances to the factory lug (as shown with the yellow circle in the additional image) can cause unnecessary wear to the Mark IV upper as well as aftermarket uppers like the...

Ruger 77/22 Bolt Shim Kit Custom tune the head space on your Ruger 77/22. Factory rifles and aftermarket barrels are made to head space within a very narrow dimension called "SAAMI Spec". And that's all they normally need to shoot accurately and reliably...

CZ-457 Head Space Bolt Shim Kit Custom tune the head space on your CZ-457. Factory rifles and aftermarket barrels are made to head space within a very narrow dimension called "SAAMI Spec". And that's all they normally need to shoot accurately and...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

These Pro Hunter screws (two long screws 0.785") with washers work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws and washers so, if you are ordering a new forend, you do not need to order these screws. We...

AR-15 Gas Block – Low Profile .936" Steel Designed for larger-diameter barrels and compact builds, this .936" Low Profile Gas Block delivers strength and simplicity. Crafted from rugged 4150 steel with mil-spec specs and a non-reflective matte...

.750 Low Profile Steel Gas Block – Includes Roll Pins & Wrench Engineered to keep your AR-15 build sleek and field-ready, this low profile steel gas block is a staple upgrade for anyone running .750” diameter barrels. Made from hardened...

A Standard AR-15 Charging Handle. Mil-Spec 6061-T6 Aircraft Aluminum Smooth Operation under Extreme Conditions Black Finish Fits: AR-15 E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Thread Protector AR-10 Heavy Profile 5/8X24 Stainless- Protect and beautify your Heavy Profile AR-10 muzzle threads with this beautiful knurled stainless thread protector. Standard 5/8X24 thread with a length of .625 inch and .930" diameter, it fits...

Ruger 10/22® Competition Trigger Kit by Power Custom - A professional action tune-up for your Ruger 10/22 that you can afford... and you can  "do-it-yourself". - Includes every important part from the insides of an expensive modular trigger...

Shaw Barrel Nut Wrench - Fits Savage and Remage Barrel Nuts.Shaw Barrel Nut Wrench for Savage 10 and 110 series bolt action rifles. Take a look at these features: Fits Savage Barrel Nuts Also Fits Remage Barrel Nuts Totally Stainless... So that...

Replacement screw for CVA Peeprib part #127-813.

These Pro Hunter screws (two long screws 0.785") work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer them only because...

Encore Muzzle Loader Screws and WashersFor T/C Encore Muzzleloader Forends  The screws and washers needed to attach the Muzzle Loader forend. Includes two (2) forend screws with two (2) washers. These screws fit factory composite and/or wood as well...

T/C Contender G2 Locking Bolt Set - Tool Steel by EABCO- Precision machined tool steel barrel locking bolts for TC Contender and G2 Contender barrels. 2021 was a worrisome time when S&W announced they were quitting the Thompson Center brand. We could...

Ruger 10/22® Extended Mag Latch Release - 90598This 10/22® Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading...

TC Encore/Contender Barrel Locking Bolt Spring- This is the coil spring that powers the Locking Bolts in the barrel underlug of Thompson Center Encore Pro Hunter and Contender. The locking bolts are compressed against this spring when you squeeze the...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...