More

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Warne Maxima Scope Mounting Bases2-Piece and 1-Piece Steel Weaver Style Scope Bases  Warne Maxima Scope Mounting Bases are rigidly strong and perfectly aligned. They attached firmly with Torx screws, too. Specially made to fit Warne Maxima Rings,...

  Used to oil the bore or to apply Natural Lube 1000 Plus™ Bore Butter as a seasoning agent. For more Muzzle Loading Accessories Click Here.

  Use for scrubbing out lead deposits. 10-32 which fits muzzleloading ramrods. For more Muzzle Loading Accessories Click Here.

Dead Center BulletsMuzzleloaders are limited in velocity by the physics of the gun and the limitations of the components. The only place left to increase performance is through bullet design... Introducing the Dead Center Bullet. Dead Centers are...

Stick-On Bifocals andStick-On Reading Lenses for Glasses WearersAdd reading glass lenses to any eyeglasses. Makes Bifocals for Shooters, Reloaders, Fishermen, and Gunsmiths... Close Focus! Add close focus reading lenses to your glasses and see clearly up...

  Solid brass body with steel jaws. This unique design allows the plunger spring to be locked in compressed position for easy loading, then released to keep #11 caps under tension for reliable dispensing. Holds up to 17 of the #11 Percussion...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

See Through Reflections and Glare!Polarized Filter for Mueller APV Scopes  A polarized lens filter that fits the Mueller APV riflescopes. This polarized lens screws onto the 40mm objective lens of your riflescope and reduces the effects of glare,...

Original TC Contender Keylock Scope Base Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Contender Keylock Scope BaseWeaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Encore Keylock Scope Base Cross Slot Style, fits TC Encore and Pro Hunter barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions).  Take...

 Mil Spec Picatinny Ruger 10/22 Scope Mount. This Tactical Ruger 10/22 mount is precision machined to meet Mil Spec Picatinny (Weaver style) dimensions, mounts with four screws (included) and is finished matte black. You'll need a good set of rings....

ELVEX Mil-Spec Electronic Hearing ProtectorsSeparate Mics, Separate Controls, Separate Batteries... Mil Spec Redundency!  These ELVEX COM-550 electronic ear muffs block noise while amplifying sound. Superior 25 dB Noise Reduction Rating (NRR) is...

    Ruger 10/22 Scope Mount with 15 MOA inclination extends the range of your Ruger 10/22 by putting 15 minutes of angle (inclination) into your scope adjustment. This enhances the elevation adjustment of your scope so that you can zero your...

Oversized Ruger 10/22 Bolt Handle Assembly This is a standard weight oversized bolt handle assembly for the Ruger 10/22 to be used when firing 22LR ammunition. Oversized handle is much easier to grip than factory handle and looks nicer...

TacSol X-Ring Ruger 10/22 .920" CompensatorThe advanced design offers 360 degree ports which steadies the muzzle so you can watch your hits and get back on target fast during rapid fire.  Fits pre-threaded 10/22 barrel...

Tactical Solutions 1022EMR-MOD Extended Magazine Release fits Ruger 10/22 Matte Olive Drab- Lever action magazine release for the Ruger 10/22. Replaces factory magazine release and gives super leverage for easy magazine drop and re-insertion. Ruger and...

Tactical Solutions 1022EMR-MB Extended Magazine Release fits Ruger 10/22 Matte Black- This sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and...

Accelerator is a pre-treat accelerant that cuts cleaning time in half. Sop your bore with it before applying Patch-Out or Wipe-Out and it will speed up the chemical reaction cleaning process. See more at our Wipe-Out Bore Foam Page.