More

McFadden CMMG .22 LR Lightnin Grip Adaptor- Adapts the Lighnin Grip mag loader to reload CMMG .22 LR AR-15 Magazines. This is the adaptor only. The Lightnin Grip mag loader is sold separately. This adaptor also works on .22 LR AR-15 magazines by Sig522 ...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

Patch-Out is Wipe-Out Bore Foam in a non-foaming liquid concentrate. It removes copper fouling even faster and more effectively because it is concentrated. Wipe-Out™ Bore Foam is Famous for its ability to safely dissolve copper fouling from your rifle...

Adjustable Ruger 10/22 Guide Rod *Additional Spring and C-Clip Retainer Sold Separately - Select Above* Heavy Duty Spring and C-Clipped Rod Allow Custom Spring Tension  Taking the Ruger 10/22 Bolt Spring and Guide Rod up a notch in precision, the...

Wipe-Out Bore Foam Gun Cleaner is different, but easy to use. Point the nozzle down the bore and squirt. The barrel instantly fills with expanding foam that penetrates every nook and cranny. Wait an hour and then just Wipe-Out the bore with a cleaning...

A Standard AR-15 Charging Handle. Mil-Spec 6061-T6 Aircraft Aluminum Smooth Operation under Extreme Conditions Black Finish Fits: AR-15 E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Standard AR15 A2 Flash HiderScrews on to your threaded barrel. 1/2x28 tpi. Overall length approximately 1.75 inches. Also works great as a thread protector.  

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

Thread Protector, 1/2x28, .860 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

T/C Contender/SSK-50 Barrel Hinge PinThis stainless steel barrel hinge pin is a direct replacement for the Thompson Center Contender and SSK-50 hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to swap...

T/C Encore and Pro Hunter Barrel Hinge Pin, StnlsThis stainless steel barrel hinge pin is a direct replacement the Thompson Center Encore and Pro Hunter hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal...

Harris Bipods #2 Flat Flange AdapterThe purpose of this big headed flange nut is to provide more support for installing a sling swivel stud in thin walled synthetic or plastic rifle forends. Your Harris Bipod attaches to the forend using the sling swivel...

Harris Bipods #2A Flange AdapterThe purpose of this wide headed flange nut is to provide more support for installing a sling swivel stud in thin walled synthetic or plastic rifle forends. Your Harris Bipod attaches to the forend using the sling swivel...

Jam Nut for Compensators, 1/2x28, Black, .750 Diam Specifications: 1/2x28 TPI .750 OD E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

JP Competition Jam Nut for CompensatorDo-It-Yourself Installation, Threaded 5/8x24, .925 Diameter, Stainless .925" OD 5/8x24 TPI E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Jam Nut fot Compensators, 5/8x24, Black, .750 Diam Specifications: 5/8x24 TPI .750OD E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Jam Nut for Compensators, 5/8x24, Stainless, .750 Dia. Specifications: 5/8x24 TPI .750OD E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

JP Jam Nut for Compensators and Muzzle Brakes Specifications: 5/8x24 TPI .875 OD Black oxide carbon steel E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

JP Jam Nut for Compensators and Muzzle Brakes Specifications: 5/8x24 TPI .875 OD Stainless E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

This is an add-on item to use with your existing rifle sling. It's a quick release adjustable second sling that goes over the other shoulder. This allows you to carry your rifle like a backpack with no worries about it slipping off your shoulder.