Shop by Model

Savage Accuracy Recoil Lug - Matte Black Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

Timney AR15 Targa 2-Stage Long TriggerStraight Trigger - Small Pin The Timney AR Targa 2-Stage Trigger is a self-contained, 100% drop-in unit that is ready to install in your AR-15 for an exceptionally smooth, crisp, two-stage trigger pull. No...

JP Low Profile, Non-RailedAdjustable AR15 Gas Block System .750 Bore  Allows tuning the AR15 bolt velocity to reduce bolt slamming, manage recoil, and increase accuracy potential. The JPGS-5B model gas block is our low...

Savage Barrel Lock Nut Lock nut to secure barrel to receiver. Screw the barrel in to set headspace, then tighten the lock nut. Precision machined to close tolerances for optimal fit, alignment, and concentricity. This nut features squared grip notches to...

Volquartsen 10/22 Replacement Receiver CNC Machined Stainless steel model is machined from billet 416 material Aluminum (Superlite) model is machined from billet 6061 aluminum alloy and Type III Hard Anodized   Volquartsen receivers are...

Hogue 10-22 Takedown Stock  The success of Ruger’s takedown 10-22 gave us an opportunity to bring something new to the party in OverMolded® stocks. We've introduced a traditional “Sporter” style takedown rifle stock –...

Ruger 10/22 Thread Protector 1/2 x 28 Thread, .920 Dia by .400 Length - We've had so many compliments on our 10/22 Accuracy Barrel Smooth Steel Thread Protectors, we decided to offer them as a separate accessory. Made to fit rifle barrels with threaded...

Magpul PMAG 10 Round AR-15/M4 Gen M3 .223 Rem/5.56X45 NATO MagazineTrue 10-round capacity that does not require limiters, pins, rivets, etcNext Gen impact and crush resistant polymer constructionWide compatibility with non Colt-spec platformsAnti-tilt...

Magpul Hunter X-22 Stock - Ruger 10/22 The Magpul Hunter X-22 chassis is an ergonomic, full-featured stock for the ubiquitous Ruger 10/22 rifle. Made from high quality reinforced polymer, the Hunter X-22 features an ergonomic grip, adjustable length of...

Timney Skeletized AR-15 TriggersSkeletized Replacement of AR-15 "Gold Standard" Triggers  This unit replaces creepy two-stage triggers with a single stage that is smooth and crisp. These triggers are available pre-set for 3 lbs or 4 lbs pull weight...

Ruger 10/22 BX-Trigger System  This is a Ruger factory replacement trigger with an improved trigger pull. Fits any Ruger 10/22 (Takedown included!) or 22 Charger. Delivers a light, crisp 2.5-3.0 lb trigger pull with minimal overtravel and positive...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volthane Grips for Ruger the Ruger Mk III PistolFamous "Volthane" grips by Volquartsen fit the Ruger Mk III (will not fit the 22/45 models). Designed to position your hand exactly the same every time you grip the pistol, these grips are an aid to...

New Condition Used as Front base on:   Berreta Pintail ES 100 Slug Gun   Colt Sauer   Remington 700 & 78 L/A, 721, 725, 40X-L long actions, 700 & 78 S/A, 722, 40X-S, 725 Short Actions, 700ML, New Model 7 (4-holes), 673   Sauer...

Composite Forend for TC Encore Pro Hunter Rifle Barrels - Black Upgrade your TC Encore or Pro Hunter rifle with this versatile Composite Forend. Designed to adapt and flex to fit the barrel contours of 24", 26", and 28" barrels, this forend combines...

Ruger Mk II/III 22/45 Magazine Bumper Pads...Dump Your Empty Mag, Then "BUMP" One of These for Fast, Secure Reloads!   Made by economical molded plastic construction, the 22/45 magazine base bumper pad looks and functions just like the ones...

Aero Precision Gen 2 Stripped AR15 LowerMachined to mil-spec dimensions, Aero Precision lowers work with standard AR15 components and ensure the highest quality with a correct component interface. Mil-Spec 7075-T6 aluminum forgings are CNC machined to...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Hogue AR-15 Free Float Hand Guard 7'' w/Overmolded Rubber in Black or Ghillie Green- This is a 12.5'', Free Floating, precision machined, aluminum hand guard for your AR-15... It gives your AR-15 a a very high quality look and feel. Free...

CNC-Machined Disconnector for MK IV This MKIV Disconnector is CNC-Machined from 416 stainless steel (the factory disconnector is a sheet metal stamping). The machining process allows several design changes to the the way the disconnector functions. We...