CMMG Mil-Spec Trigger Kit, AR15 - 55AFF97The perfect trigger for your next build.  Reliable single stage design based on the original M16 trigger, modified for semi auto use.Mil-Spec Trigger Kit includes:Hammer AssemblyHammer SpringTriggerTrigger...

CMMG Gas Tube Kit, Rifle Length Length - 55DA196Fits AR-15Rifle LengthStainless SteelIncludes Roll Pin

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa with synthetic. One of them will fit to...

TC Encore/Contender Barrel Locking Bolt Spring- This is the coil spring that powers the Locking Bolts in the barrel underlug of Thompson Center Encore Pro Hunter and Contender. The locking bolts are compressed against this spring when you squeeze the...

T/C Extractor Leaf Spring by EABCOThis is the little leaf spring that fits against the bottom of rimless extractors on Thompson Center accessory barrels. Rimless cartridges such as 223 Remington or 308 Winchester have a special extractor that flexes...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...

T/C Contender 30-30 Winchester Extractors are Tool Steel by EABCOThese 30-30 Winchester extractors are used for TC Contender and G2 Contender barrels that are chambered for the 30-30 Winchester cartridge. Our extractors are precision machined from tool...

T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...

TC Contender Underlug Roll Pin Kit- Replacements for the roll pins used in the underlug assembly of Thompson Center Contender and G2 Contender barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

DPMS COMPATIBLEAR-10/LR-308 M-Lok 12" Super Slim Free Float Handguard.Features:Matte Black FinishM-LOK SlotsInside Diameter: 1.5"12" LengthAircraft Grade AluminumAnti-Rotation TabsOne Piece Free Float DesignHybrid Cut Picatinny Top RailDPMS Low Pattern...

MDT Adjustable Vertical Grip Elite fits AR10/15 and Oryx, Black Colored- This Vertical Grip Elite is the most adjustable grip currently available for the AR-15 grip interface. Adjusting the grip position enables the shooter to properly position their...

MDT Adjustable Vertical Grip Elite fits AR10/15 and Oryx, FDE Colored- This Vertical Grip Elite is the most adjustable grip currently available for the AR-15 grip interface. Adjusting the grip position enables the shooter to properly position their hand...

T/C Contender 357 Magnum Extractors are Tool Steel by EABCOThese 357 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 357 Magnum, 357 Maximum, 38 Special, 7mm SuperMag, and any other cartridges that have the...

Adaptive Tactical 02012 EX-AR Rifle Stock, Mil Spec, FDEAdvanced design and high-impact, polymer construction make the EX Performance Adjustable Stock the ideal upgrade for AR15, AR10, or any firearm with Mil-Spec sized extension tubes*.REDUCE RECOIL AND...

Adaptive Tactical 02012 EX-AR Rifle Stock, Mil Spec, BlackAdvanced design and high-impact, polymer construction make the EX Performance Adjustable Stock the ideal upgrade for AR15, AR10, or any firearm with Mil-Spec sized extension tubes*.REDUCE RECOIL...

Push Buttom QD Sling Swivel fits AR-15, Oryx, etc. This is our standard QD sling swivel with low profile push-button release. It fits the standard .365" QD swivel ports on AR-15s and many chassis stocks like out Oryx. It's made of solid steel, accepts...

T/C Contender 22 Hornet Extractors are Tool Steel by EABCOThese 22 Hornet extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Hornet cartridge. It also works with many other cartridges that have the same rim. Our...

T/C Contender 6.8 Remington SPC Extractors are Tool Steel by EABCOThese 6.8 Rem SPC extractors are used for TC Contender and G2 Contender barrels that are chambered for the 6.8 Remington SPC cartridge. It also works with other cartridges that have the...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...