Shop by Model

The standard Encore forend screws (one long screw 0.785", one short screw 0.475") fit the Encore Rifle Forends (Not the Pro Hunter Rifle Forends). Note:  The standard Encore PRO HUNTER screws (two long screws) work on the Encore Pro Hunter (Flex...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Warne Maxima Scope Mounting Bases2-Piece and 1-Piece Steel Weaver Style Scope Bases  Warne Maxima Scope Mounting Bases are rigidly strong and perfectly aligned. They attached firmly with Torx screws, too. Specially made to fit Warne Maxima Rings,...

  Everything you need for cleaning and conditioning your muzzleloading firearm. T-17 products are specifically formulated to clean and protect your prized muzzleloader. Includes:   2 oz. bottle T-17 Bore Cleaning Solvent...

Ruger Mark Series Ambidextrous Combat Low-Rise Holster. Shooters demanded it; this holster is designed to fit the Ruger® Mark Series (MK-I, MK-II, MK-III, MK-IV & 22/45) .22LR pistols with or without an optic or a suppressor. This...

  Our M1 Carbine Sling with Oiler is completely faithful to the early horseshoe type 1st issue slings. These dot the eye fastener, khaki web slings are exactly as per the original WWII issue. The oiler has the shaped dipper and gasket. For those who...

TechSights 200 Sight Set for Ruger 10/22   The TechSights 200 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the...

  The TechSights 100 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the front, and approximately 7.5" more sight...

Dead Center BulletsMuzzleloaders are limited in velocity by the physics of the gun and the limitations of the components. The only place left to increase performance is through bullet design... Introducing the Dead Center Bullet. Dead Centers are...

  Solid brass body with steel jaws. This unique design allows the plunger spring to be locked in compressed position for easy loading, then released to keep #11 caps under tension for reliable dispensing. Holds up to 17 of the #11 Percussion...

  This Thompson Center Pyrodex powder spout makes it easier to pour Pyrodex powder directly from the container into a powder measure. This spout is for the Pyrodex Powder Bottles Only. For more Muzzleloading Accessories Click Here.

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Encore Keylock Scope Base- Weaver style, fits TC Encore and Pro Hunter barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions).  Take...

 Mil Spec Picatinny Ruger 10/22 Scope Mount. This Tactical Ruger 10/22 mount is precision machined to meet Mil Spec Picatinny (Weaver style) dimensions, mounts with four screws (included) and is finished matte black. You'll need a good set of rings....

    Ruger 10/22 Scope Mount with 15 MOA inclination extends the range of your Ruger 10/22 by putting 15 minutes of angle (inclination) into your scope adjustment. This enhances the elevation adjustment of your scope so that you can zero your...

Oversized Ruger 10/22 Bolt Handle Assembly This is a standard weight oversized bolt handle assembly for the Ruger 10/22 to be used when firing 22LR ammunition. Oversized handle is much easier to grip than factory handle and looks nicer too! NOT for 17...

Tactical Solutions X-Ring Ruger 10/22 Barrel A Chromoly Steel Barrel is sleeved in .920 diameter aluminum and fluted...   This gives heavy barrel stiffness with significantly less weight, and retains a nice balance for aiming and shooting...

Tactical Solutions Ruger 10/22 Barrel 16.5" Matte Black Threaded A light weight Ruger 10/22 barrel with chromoly bore and .920 dia aluminum sleeve. This gives heavy barrel stiffness with reduced weight but, it retains a nice balance for aiming and...