Shop by Model

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

DURAMAG SS 400 LEGEND Magazine - 5 Rnds A Legendary caliber deserves a legendary magazine and the 400 Legend Duramag SS delivers the only purpose built magazine for this caliber. With these Duramag SS mags you’re getting 400 Legend specific rib...

TC G1 Contender/SSK-50 Composite Buttstock - Full length Montecarlo styled buttstock fits original G1 Contender and SSK-50 frames (Does NOT fit the G2). Rigid and weatherproof composite construction with pistol grip and Limbsaver recoil pad. Includes...

ORYX Chassis Stock fits Savage Axis LA/RH - BLACK Chassis panels come in BLACK Weight: 4.2 lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts Standard Grips (included) M-LOK pattern...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

T/C Omega/Encore 209 Breech PlugDirect Replacement for the Original TC 7763 Breech Plug Fits Original 209x50 Encore and Omega Muzzleloaders Does NOT fit Pro Hunter, Endeavor, FX, nor Speed Breech Uses Standard 209 Primers If you've been looking for a...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

6.8 Rem SPC AR15 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 6.8 Rem SPC, 400 Legend, 224 Valkyrie, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for excellent durability and...

SSK-50 Frame, Lynx Sided The Original Contender/SSK-50® design is back in production, thanks to the SSK Firearms company. It has been a long time and a big challenge to re-tool for independent production of this classic single shot action. This new...

Thompson CenterG1 Contender and SSK-50 Pistol Grip Composite pistol grip fits the original G1 Contender as well as the new SSK-50 frames. Comfortable ambidextrous shape with finger grooves and palm swell. Two part construction features hard plastic front...

These Pro Hunter screws (two long screws 0.785") with washers work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws and washers so, if you are ordering a new forend, you do not need to order these screws. We...

Black Nitride AR15 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 6.5 Grendel Type II, 6 ARC, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for the excellent durability and...

Black Nitride AR15 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 223 Rem, 5.56 NATO, 300 Blackout, 350 Legend, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for the excellent...

Our Mil-Spec Rifle Length Buffer Tube Kit consists of a 10" fixed position buffer tube, heavy 5.6 oz buffer assembly and an 11.5" pre-loaded steel spring. The buffer tube is made of T6-6061 aluminum and is designed to fit any A1/A2 fixed position...

This is a .936" diameter Low Profile Gas Block designed to accommodate the larger barrel, yet fit under most handguards. Features: .936 diameter Low Profile Height: 1.43" 4150 Steel Construction Non-reflective, Matte Black finish Includes roll pin, 2...