MDT CZ-457 Picatinny Scope Bases - Multi MOA Precision machined Picatinny scope mounts in your choice of MOA. MDT's Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle...

MDT M-LOK ARCA Rail 3.3 Inch Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail. This handy 3.3 inch ARCA rail attaches to any rifle, handguard, or chassis with M-LOK slots. ARCA Swiss adapters have become the standard for...

ORYX Chassis fits Savage 10/110 SA LH - OD Green Left Handed Chassis Only - Does not include magazine, gun, scope, etc. Chassis Color Panels are OD Green Weight: 4.2lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL...

ORYX Chassis Stock fits Savage Axis SA/RH - Black Chassis panels come in Black Weight: 4.2lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK pattern slots...

MDT GRND-POD PRS Bipod The MDT GRND-POD was designed to maximize versatility, as well as cost savings, while retaining features that are most important in a precision rifle bipod. The GRND-POD goes far beyond the typical Harris Bipods in features, like...

  This Allen Head screw kit includes one long screw 0.785", one short screw 0.475", and two washers.  This hardware kit is specifically made for the 127-7661 or 317-09-02-16 Forends.  These screws do NOT fit muzzle loader nor shotgun...

EABCO Forend Washers fit T/C Encore Pro Hunter- These are replacements for the tiny little Washer/Spacers under the screws on TC Encore and Pro Hunter forends. We had a devil of a time finding a source for them and they are expensive. Forend washers are...

KAK Compensator Kit9/16x24 fits 40 Cal- Includes Crush Washer- Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake. The exit hole has to allow clearance for the .357 caliber 350 Legend bullet. The easy answer for...

ORYX Chassis Stock fits Remington 700 LA/RH - OD Green Mag Compatibility: 3.715" AICS magazines   aPlease check the size of your Long Action AICS Magazine...       (It's stamped right on it. Make sure it will...

ORYX Chassis fits Savage 10/110 LA/RH - OD Green Mag Compatibility - Long Action AICS 3.715"  aPlease check the size of your Long Action AICS Magazine...    (It's stamped right on it. Make sure it will fit!) Chassis panels come in...

EABCO Firing Pin SPRING fits TC Encore Pro Hunter- Replacement for the Thompson Center factory firing pin spring (that sometimes breaks). Our EABCO brand spring is made from a little thicker spring stock to give better durability. Expansion power and...

T/C Contender G2 Locking Bolt Set - Tool Steel by EABCO- Precision machined tool steel barrel locking bolts for TC Contender and G2 Contender barrels. 2021 was a worrisome time when S&W announced they were quitting the Thompson Center brand. We could...

T/C Contender and G2 Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Contender and G2 Contender hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

EABCO Picatinny Scope Mount fits Ruger 10/22- This Precision Machined 10/22 Picatinny Rail mounts to your existing 10/22 scope mounting holes and gives superior alignment and rigidity for the best accuracy potential. It's totally machined from aircraft...

T/C Encore and Pro Hunter Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Encore and Pro Hunter hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa with synthetic. One of them will fit to...

TC Encore/Contender Barrel Locking Bolt Spring- This is the coil spring that powers the Locking Bolts in the barrel underlug of Thompson Center Encore Pro Hunter and Contender. The locking bolts are compressed against this spring when you squeeze the...

T/C Extractor Leaf Spring by EABCOThis is the little leaf spring that fits against the bottom of rimless extractors on Thompson Center accessory barrels. Rimless cartridges such as 223 Remington or 308 Winchester have a special extractor that flexes...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...