Universal Shotgun Forend Screw Set for Encore and Pro HunterT/C Shotgun forends use slightly different screws for 20 ga. and 12 ga. If you have lost one or both screws, this kit will get you back up and running. This kit includes one shorter screw 0.75",...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

Savage Barrel Installation ServicesOur Skilled Gunsmiths can Headspace and Install Barrels... Channel ForendsWe'll set up your headspace for the best accuracy and reliable ammunition fit and function. Then we'll double check it with the best SAAMI spec...

Pro Hunter "FlexTech" Muzzle Loader Forend Screws and Washers The TC Factory Pro Hunter "FlexTech" forend for muzzle loaders has two screws of different length (2 washers also included). If you've lost one or both screws or washers, this kit supplies...

An M1 Carbine Replica Canvas Gun Case that fits the Ruger 10/22, M1 Carbine, and other rifles of similar dimensions (fits rifles up to 36" long). Available in a  lined version that still looks authentic but gives better padding and...

Ruger BX-25 Magazine - 25 Round Ruger 10/22 Magazine   This genuine Ruger® factory magazine with Ruger® logo has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger® rotary magazine. This level of...

Slip-Over Scope Mount for Ruger #1 Weaver Style Scope Base Slips Over Ruger No. 1 Rib  Our new "Slip-Over" Ruger #1 scope mount solves the problem of aligning an after market scope base on a contoured barrel... It uses the factory pre-aligned rib as...

Ruger® Brand Magazines for Mk II and MK I Pistols Genuine Ruger factory 9 Round magazines for your Ruger Mark I and Mark II Pistols.  Note, this does not fit the 22/45 versions.

Savage Tactical Varmint Scope Mount LA (Long Action) Silver  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount LA (Long Action) Black  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

Savage Tactical Varmint Scope Mount SA (Short Action) SilverOur new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several advantages...-...

ScopeRib III Sight System for Handgun Silhouette- Match grade, long range pistol sights combined with a scope mount so that you don't have to disturb the alignment of your sight system when using a scope to work up hand loads.- The ScopeRib III Sights...

Dummy M1 Carbine Mag Conversion for Ruger 10/22 MagsAuthentic M1 Carbine Style Base Glues Onto 10 Round 10/22 Magazine (Mag Not Included)- Give Your Ruger 10/22 a Classic Military M1 Carbine Style... These "Dummy" M1 Carbine Magazine conversions attach...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Oversized Ruger 10/22 Bolt Handle Assembly This is a standard weight oversized bolt handle assembly for the Ruger 10/22 to be used when firing 22LR ammunition. Oversized handle is much easier to grip than factory handle and looks nicer...

Ruger 10/22 Magazine- ClearFits the Ruger 10/22 rifle. These are special edition clear plastic Ruger factory magazines with the rotary mechanism. Each magazine holds 10 rounds of .22LR ammo and fits flush with the bottom of the Ruger 10/22 action. We...

Ruger 10/22® Magazine- Black- Fits the Ruger 10/22 rifle. These are original black plastic Ruger factory magazines with the rotary mechanism. Each magazine holds 10 rounds of .22LR ammo and fits flush with the bottom of the Ruger 10/22 action. We...