Volquartsen Target Hammer Kit for the Ruger 10/22- The target hammer kit was designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer (Not for BX-Trigger). No stoning or fitting is required. Reduces trigger...

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...

Jard 3596 Set Trigger fits Remington 700 3 lb. - A true SET trigger just like the old Sharps rifles. It comes pre-set for a standard 3 lb. trigger pull... But when you want a super light pull, you just push the trigger forward until it clicks... This...

Jard 3593 Set Trigger fits Remington 700 2 lb. - A true SET trigger just like the old Sharps rifles. It comes pre-set for a standard 2 lb. trigger pull... But when you want a super light pull, you just push the trigger forward until it clicks... This...

Jard 4626 Trigger fits Savage 10/110 Series Rifles 13-18 oz. Top Bolt Release- JARD's remarkable 3-Lever System brings exceptional trigger performance to Savage centerfire rifles (see the list of compatible models below). Designed to replace the factory...

Jard 4625 Trigger fits Savage 10/110 Series Rifles 7-12 oz.- JARD's remarkable 3-Lever System brings exceptional trigger performance to Savage centerfire rifles (see the list of compatible models below). Designed to replace the factory trigger on most...

Jard 4510 Trigger fits Savage A17/A22 Magnum and Gives 2.5 lb Pull Weight- At last there's a replacement trigger for the remarkable Savage A17! The JARD Savage A17/A22 Trigger System brings JARD’s exceptional trigger performance to the Savage A17/A22...

Jard 4509 Trigger fits Savage A17/A22 Magnum and Gives 2 lb Pull Weight- At last there's a replacement trigger for the remarkable Savage A17! The JARD Savage A17/A22 Trigger System brings JARD’s exceptional trigger performance to the Savage A17/A22...

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

Remington 700 Accuracy Recoil Lug - Bright Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN...

Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

Remington 700 Accuracy Recoil Lug - Matte Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Remington 700 Accuracy Recoil Lug - Bright Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Ruger MK I, II, III & IV Fiber Optic Adjustable Rear Sight Improve the performance of your Ruger MK I, II, III and IV with the new adjustable rear sight. Our bright and fully adjustable rear sight will enhance your confidence and shooting experience...

Magazine Release for Ruger MK IV (not 22/45)Standard size replacement for the extended magazine release that comes on factory Ruger MK IV Hunter and Competition models. This part replaces the extended factory part for users of our Volthane and Laminated...

Timney 49ER Ambidextrous Safety fits AR15- The Timney 49er is a 49 or 90 degree AR15 safety (Ambidextrous). It can be used in either the normal 90 degree or for ultra quick changes a 49 degree short throw for quick and easy manipulation. In addition,...

Upgraded 10/22 Receiver Cross PinsThis (2-Pack) includes: Upgraded pins won’t fall out when working on your gun Steel pin is highly durable Spring-loaded ball detent holds pin in place securely, installs easily If you’ve upgraded your...

JP Competition Series AR10 CompensatorDo-It-Yourself Installation, Replaces 5/8x24 Flash Suppressor- Developed and evolved from YEARs of competitive shooting, the JP Competition Series Compensator has reached an optimum level of effectiveness while...

JP Competition AR10/AR308 CompensatorDo-It-Yourself Installation, Replaces 5/8x24 Flash Suppressor- Developed and evolved from YEARs of competitive shooting, the JP Competition Series Compensator has reached an optimum level of effectiveness while...

350 Legend Magazine fits AR15, 5 Round by CMMG - This 350 Legend Magazine and our 350 Legend Barrel are just about all you need to convert your 223/5.56 AR15 rifle to shoot 350 Legend ammunition for Deer Hunting (or other big game). The 5-Round magazine...