Volquartsen VC2AK-S Accurizing Kitfor Ruger Mark II, III and 22/45, Silver/Black- Drop In Target Grade Accurizing Kit with silver extended bolt release and black trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary slightly due to factory...

Remington 700 Accuracy Barrel® 6.5 Creedmoor 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Savage Accuracy Barrel® 6mm Creedmoor 1:8 Fits Savage 10/110 Series RiflesFits Savage Axis & Axis II Short and Long Action Rifles6mm Creedmoor uses a 308 Win Bolt Face26" length, weight approx 4lbs 7.8ozVarmint weight tapered to just under .800"...

Ruger Mk I, II, III HSS Ease-Of-Assembly Upgrade- The HSS (Hammer Strut Support) is a parts upgrade that greatly improves the ease of assembly for Ruger MK I,  II, and III pistols (It DOES NOT fit ANY 22/45, nor ANY Mk IV). It simply eliminates the...

Tandemkross "Victory" Trigger Replacement for Ruger Mk IV Silver Features:

Tandemkross "Victory" Trigger Replacement for Ruger Mk IV Silver Features:

Volquartsen Ruger MK IV® Accurizing Kit This complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Black Target Trigger with plunger and spring. It also comes with pretravel and...

Standard AR15 A2 Flash HiderScrews on to your threaded barrel. 1/2x28 tpi. Overall length approximately 1.75 inches. Also works great as a thread protector.  

Colt AR15/M16 Lower Receiver Offset Adaptor PinEasily adapts Colt large pin lowers to fit standard small pin AR15 upper receivers, ensuring a precise, tight fit. Key Features: Compatibility: Designed to bridge older Colt large pin lowers with modern...

JARD 10/22 Trigger Spring Kits  Replacement springs for JARD brand Ruger® 10/22 Triggers. You can order these spring kits to change the pull weight for different situations, like hunting or target shooting. These must only be used in...

AR-15 and AR-10 Top Adjustable Single Stage Trigger System Small Pin, Speed Hammer... Fits All Brands Except ColtThe JARD AR-15 Top Adjustable Trigger System will let you fine tune your trigger the way you like it easily from the top side of trigger...

The JARD Ruger® Precision Rifle™ Trigger is an easy way to improve your trigger pull.  This trigger upgrade gives you adjustability that the original factory trigger does not allow.Order your Trigger  below by selecting the trigger pull...

JARD Adjustable Ruger® 10/22® Trigger Assembly Black- Adjustable over travel and sear engagement with faster lock time for your Ruger 10/22. The pivot point for the hammer is located higher in the assembly to give a shorter travel and shorter...

Ruger No 1 Trigger Replacement 1 lb. Pull  Replaces the factory trigger, transfer bar, and sear with a better, one-piece design. It pivots off the factory sear pivot point instead of the original trigger pivot point, giving a mechanical advantage...

Tandemkross "Victory" Trigger, BlackReplacement for Ruger Mk III and Mk IV 22/45Features at a Glance:Flat faced for better control and feel100% Adjustable for pretravel and overtravelLightweight skeletonized designFits MKIII or MKIV, Original or...

Tandemkross Mark III (22/45) Hammer Bushing for Magazine Disconnect-Stainless SteelCompatibility: MKIII -ALL MODELS MKIII 22-45 MKIII 22-45 Competition MKIII 22-45 Government Target MKIII 22-45 Target MKIII Competition MKIII Government Target MKIII...

Savage Accuracy Recoil Lug - Matte Black Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Timney AR15 Targa 2-Stage Long TriggerStraight Trigger - Small Pin The Timney AR Targa 2-Stage Trigger is a self-contained, 100% drop-in unit that is ready to install in your AR-15 for an exceptionally smooth, crisp, two-stage trigger pull. No...

Warne Maxima Scope Mounting Base for Savage Axis/EdgeWeaver Style, Low Profile, Tough and Solid  Warne Maxima Scope Bases are all steel, rigid and accurate one piece scope mounting bases. Finished in Matte Black to match the Warne Tactical Rings as...