YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

Remington 870 Trigger Tune Spring Kit This kit comprises of both a replacement hammer spring as well as five different trigger springs ranging in pull weight from 1.25lb to 5lb. The hammer spring is made from stainless steel, and the trigger springs are...

 8-40 thread Stainless Plug Screws for front sight holes on Thompson Center Muzzleloaders. These screws work on the following TC Muzzleloaders; Encore, Encore Pro Hunter, Black Diamond, Omega and Tiumph. If you need blue plug screws, please click...

8-40 Plug Screws Blue (Pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 8-40 thread Blue Plug Screws fit the  front sight holes...

The Ultimate Trigger Kitfor the Ruger MKIV & MKIV 22/45 RedThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45™ is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

TC Contender Forend 7 Inch with Picatinny Rail A full featured forend for G1 and G2 Contender and well as SSK-50 Barrels and Frames. This forend uses a unique "hanger bar" attachment system. The hanger bar attaches to the barrel and the forend attaches...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pin  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision ground "drill rod" to fit closely for accuracy...

T/C Contender and G2 Barrel Pivot Hinge Pins  This is the original factory hinge pin that pivots the barrel downward when you open and close your Contender action. Made from precision ground "drill rod" to fit closely for accuracy while allowing...

T/C Contender and G2 Barrel Pivot Hinge Pin  This is the original factory hinge pin that pivots the barrel downward when you open and close your Contender action. Made from precision ground "drill rod" to fit closely for accuracy while allowing...

TC Encore ProHunter Flextech Thumbhole Buttstock We are excited to offer new to our loyal TC customers! Estimated ETA Q3-Q4 2025   E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

TC Encore Breech Plug Wrench for Original Encore Speed Breech We are excited to offer new to our loyal TC customers! Estimated ETA Q3-Q4 2025   E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

TC Encore ProHunter and Triumph Breech Plug XT Wrench Speed Breech TX breech plug - 90 degree turn and out - by hand. We are excited to offer new to our loyal TC customers! Estimated ETA Q3-Q4 2025   E. Arthur Brown Company, Inc4088 County Road...

TC Encore ProHunter Muzzleloader Forend - Flextech   Features: Black Composite TC Flextech technology Fits TC Encore ProHunter Muzzleloader barrels The T/C ENCORE® ProHunter™ platform is the most versatile firearm in the marketplace...

TC Encore ProHunter 12 Ga Shotgun Forend - Flextech   Features: Black Composite TC Flextech technology Fits TC Encore ProHunter 12 Ga Shotgun barrels We are excited to offer new to our loyal TC customers! Estimated ETA Q3-Q4 2025   E...

TC Encore ProHunter 410 Ga & 20 Ga Shotgun Forend - Flextech   Features: Black Composite TC Flextech technology Fits TC Encore ProHunter 410 Ga & 20 Ga Shotgun barrels We are excited to offer new to our loyal TC customers! Estimated ETA Q3-Q4...

TC Encore 209x50 & Omega Breech Plug - The first breech plug design for TC Encore "209X50" muzzleloading barrels. Later TC came out with the Omega muzzleloader and used this same breech plug. Compare the photo with your old breech plug to be sure you...