The JARD Ruger® Precision Rifle™ Trigger is an easy way to improve your trigger pull.  This trigger upgrade gives you adjustability that the original factory trigger does not allow.Order your Trigger  below by selecting the trigger pull...

JARD Adjustable Ruger® 10/22® Trigger Assembly Black- Adjustable over travel and sear engagement with faster lock time for your Ruger 10/22. The pivot point for the hammer is located higher in the assembly to give a shorter travel and shorter...

Ruger No 1 Trigger Replacement 1 lb. Pull  Replaces the factory trigger, transfer bar, and sear with a better, one-piece design. It pivots off the factory sear pivot point instead of the original trigger pivot point, giving a mechanical advantage...

Tandemkross "Victory" Trigger, BlackReplacement for Ruger Mk III and Mk IV 22/45Features at a Glance:Flat faced for better control and feel100% Adjustable for pretravel and overtravelLightweight skeletonized designFits MKIII or MKIV, Original or...

Tandemkross Mark III (22/45) Hammer Bushing for Magazine Disconnect-Stainless SteelCompatibility: MKIII -ALL MODELS MKIII 22-45 MKIII 22-45 Competition MKIII 22-45 Government Target MKIII 22-45 Target MKIII Competition MKIII Government Target MKIII...

Savage Accuracy Recoil Lug - Matte Black Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Timney AR15 Targa 2-Stage Long TriggerStraight Trigger - Small Pin The Timney AR Targa 2-Stage Trigger is a self-contained, 100% drop-in unit that is ready to install in your AR-15 for an exceptionally smooth, crisp, two-stage trigger pull. No...

Warne Maxima Scope Mounting Base for Savage Axis/EdgeWeaver Style, Low Profile, Tough and Solid  Warne Maxima Scope Bases are all steel, rigid and accurate one piece scope mounting bases. Finished in Matte Black to match the Warne Tactical Rings as...

Timney Skeletized AR-15 TriggersSkeletized Replacement of AR-15 "Gold Standard" Triggers  This unit replaces creepy two-stage triggers with a single stage that is smooth and crisp. These triggers are available pre-set for 3 lbs or 4 lbs pull weight...

Ruger 10/22 BX-Trigger System  This is a Ruger factory replacement trigger with an improved trigger pull. Fits any Ruger 10/22 (Takedown included!) or 22 Charger. Delivers a light, crisp 2.5-3.0 lb trigger pull with minimal overtravel and positive...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Hybrid Match Ruger 10/22 BoltAccuracy Tuned and CNC Machined to Minimum TolerancesHybrid Match 10/22 Bolt combines the precision of CNC machining with accuracy enhancing parts and tune-up techniques. Drop-in fit... Just replace your bolt with this one...

Pre-Bent Gas Tube for AR-15 Carbine Length Forends   This pre-bent gas tube is required when using Hogue AR-15 Carbine Length Free Float Forends. The internal dimensions of a Hogue Carbine Length Forend are restricted somewhat and this requires...

The Remington 870 top folding stocks make an excellent compact package. These stocks are made of solid cast steel with plastic over molded around it. This stock is operated with a simple push of a thumb button to lock it in either the open or closed...

Remington 870 Magazine Extension Tubes 12 ga. Increase the fire power of your shotgun with a magazine extension kit. These kits are constructed of solid blued steel and come with 1 Magazine Extension - (6,7,8, 9 or 10 shot), 1 Base Clamp, 1 High...

Timney AR-15 Competition TriggersCompetition Replacement of AR-15 Fire Control Group  Timney Triggers for AR-15 are also called the Fire Control Group. This unit replaces creepy two-stage triggers with a single stage that is smooth and crisp. These...

  Barrel droop or barrel sag is a consideration when you're seeking optimum accuracy and scope alignment with the Ruger 10/22. The standard slip-fit of the barrel to the receiver can be drawn or pulled downward as it is tighten onto the receiver...

Main Spring Assemblies for Ruger Mk II, IIIPrecision made replacement for factory main spring assembly. Wire EDM and CNC machined to give the best fit and performance. Mk II and III version differs from 22/45 version due to grip angle difference in the...