TC Encore Pro Hunter or Contender Trigger Job ServiceExpertly Performed by an Experienced, Skilled EABCO Gunsmith Sear Engagement Shortened - Reduces Trigger Movement Before The Shot Sear Engagement Polished - Gives Consistant, Predictable Feel, Shot...

Rifle Basix SAV-1 Trigger for Savage (Black)- High performance replacement trigger for Savage Axis/Edge and all 10/110 Series rifles. Adjusts from 14 oz. to 3 lbs. Adjustable take-up and over-travel. Fits original as well as AccuTrigger rifles, short and...

Warne 20 MOA Tactical Scope Mounting BasesTrue Picatinny Mil-Spec Scope Mounting Bases are Tough and Accurate  Warne Maxima 20 MOA Tactical Scope Bases are all steel, rigid and accurate one piece scope mounting bases. These "20 MOA" bases have 20...

A composite pistol grip combined with side folding stock hardware that incorporates an M4 telescoping buttstock (forend also included). This side folding 870 stock lets you have a compact shotgun for easy storage and the option of adjustable length of...

  These kits take away the mystery of fine tuning the Ruger 10/22® action and result in a superb trigger pull and super fast lock time. The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement...

Ruger 10/22 Accuracy Firing PinWider Impact Surface Disrupts the Rim Less, Improves Accuracy Potential  Firing pin impact plays a critical role in the accuracy of rimfire cartridges. For example, the Russians developed a 2-pin system that dominated...

  These are the standard forend screws that fit Encore 24 and 26 inch barrels as well as Prohunter 28 inch barrels. New forends include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer the ...

The Ruger 10/22® Competition Sear Kit lightens the trigger pull and smooths the trigger return. Hand stoned engagement surfaces. Includes a new sear, extra power sear spring, and two .004" trigger shims. This sear, when used with proper engagement of...

The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement surfaces are precision ground and vapor honed. The kit includes a new hammer, extra power hammer spring, two .004" shims and a new trigger return...

Encore Muzzle Loader Forend HardwareFor Factory Walnut and EABCO Laminate Muzzleloader Forends   All the hardware needed to attach the Encore Laminate or Factory Walnut Muzzle Loader forend. Includes the leaf spring rod retainer with screw, and...

Ruger Mark IV Pistol Trigger Shims These trigger shims fit Ruger Mark I, II, III, IV & 22/45 Pistols. They install on the Left Side of the Trigger, between the Trigger and the #AN37 Bolt Stop Assembly. Installing a Shim here will stop the Trigger...

YoDave Marlin 336 Reduced Power Finger Lever Spring No more fighting to click the lever into the fire position on Marlin Model 1894, 1895, 336 and 444 models! Polishing the mating surfaces of the lever and the plunger as well as the addition of a reduced...

 YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Springs for the JARD CZ-457 Trigger Replacement springs to change pull weight on the JARD CZ-457 Trigger. These are the springs shown in the JARD CZ-457 Trigger instruction manual. You can swap in a stronger or a lighter spring to change the pull weight...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

Remington 870 Trigger Tune Spring Kit This kit comprises of both a replacement hammer spring as well as five different trigger springs ranging in pull weight from 1.25lb to 5lb. The hammer spring is made from stainless steel, and the trigger springs are...

 8-40 thread Stainless Plug Screws for front sight holes on Thompson Center Muzzleloaders. These screws work on the following TC Muzzleloaders; Encore, Encore Pro Hunter, Black Diamond, Omega and Tiumph. If you need blue plug screws, please click...

8-40 Plug Screws Blue (Pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 8-40 thread Blue Plug Screws fit the  front sight holes...