Volquartsen Laminated Right-Hand Target Grips – Fits Ruger Mk III (Not 22/45) Dial in comfort and control with these precision-crafted Target Grips from Volquartsen. Designed specifically for Ruger Mk III pistols, they feature a right-hand...

TG2000 Trigger Group The TG2000 is the drop-in replacement trigger group for the Ruger 10/22, 10/22 Takedown, 22 Charger, and 22 Charger Takedown. Easy to install, it should require no modifications and give a superb trigger right out of the box...

Rifle Basix Replacement Trigger for the Model 70 (Silver)Upgrade your Winchester rifle with the Rifle Basix Replacement Trigger for the Model 70, a fully adjustable, precision‑machined trigger designed to enhance consistency, control, and overall...

Rifle Basix SAV‑RAT Trigger (Silver)Upgrade your Savage rimfire rifle with the Rifle Basix SAV‑RAT Trigger (Silver) - a fully adjustable, drop‑in replacement designed specifically for Savage rimfire models equipped with the AccuTrigger™. This...

JP Competition .223 Muzzle Brake .875" Stainless- Developed and evolved from YEARs of competitive shooting, the JP Competition Series Compensator/Brake has reached an optimum level of effectiveness while keeping a low, traditional looking profile. The...

Features of the Choate Tactical Stock: Full length bedding block (see cutaway picture) Adjustable butt spacer system to adjust the length of pull Rail and sliding swivel on bottom of forend to attach a bipod Sling swivels on both sides. Will work on...

Features of the Choate Tactical Stock: Full length bedding block (see cutaway picture) Adjustable butt spacer system to adjust the length of pull Rail and sliding swivel on bottom of forend to attach a bipod Sling swivels on both sides. Will work on...

Choate Tactical Custom Savage Stock  This stock has a full length bedding block, a rail on the bottom of the forend to attach a bipod, and sling swivels on both sides. It also has a custom machined aluminum cheek piece of 6061 T6 with a .750 inch...

Mark V Competition Compensator 223 | 1/2-28 TPI | .875 OD | QPQ Black The culmination of decades of JP brake development, the MK V represents a radical leap forward in muzzle brake design. These comps deliver over 35% more recoil reduction than even our...

Volquartsen Bolt Release and Hammer Pack for Ruger 10/22, Silver - This popular kit combines our 10/22 Target Hammer along with our 10/22 Auto Bolt Release into one package. A great way to start customizing your factory 10/22. - The target hammer is...

Picatinny Rail for Ruger MK IV This rail can be mounted in two directions, allowing the rear sight to stay mounted; when reversed, it will cover the rear sight dovetail. Fits factory Ruger MKIII and MK IV uppers. Mounts in Two Directions Fits Ruger MKIV...

Bolt Tune Up Kit for Ruger MKII, MKIII, MKIV, and 22/45 Improve the reliability of feeding, firing, and ejecting on your pistol... Eliminate light strikes and stovepipes. This very simple upgrade, replaces the mass production stamped sheet metal parts in...

MDT Hunt Brake A super light weight titanium muzzle brake with up to 64% recoil reduction.The MDT Hunt Brake was built for one job: to tame recoil on the lightest precision rifles in the world.Whether you're hauling your rifle 10,000 feet into the...

TC T17 Breech Plug Cleaner W/Dipping Basket Muzzleloader soaking system for cleaning breech plugs and other parts.  E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

Thompson Center Bore Driver® Bullets – High-Performance Muzzleloader Ammunition Engineered for modern muzzleloaders, the T/C Bore Driver® line combines Hornady innovation with Thompson Center reliability. Unlike traditional sabots, these...

TC Ramrod Accy Kit .50 Cal Patch Puller Worm: Solid brass with strong steel fingers. Ball & Bullet Puller: Brass bore guide centers the pointed screw on the stuck bullet for easy removal, works well for removing stuck shotgun wads, sabots, and...

TC T-Handle Short Starter Use as a bullet starter or ramrod handle, screws onto jag or ramrod. E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

T17 Pre-Saturated Muzzleloader Cleaning Patches Qty 100 Round cotton cleaning patches pre-moistened with Triple 7 Bore Cleaner fit 45-54 caliber muzzleloaders. Use these with your ramrod and jag to dissolve Triple 7 (aka 777) powder fouling in the bore...

TC Ramrod Accy Kit .45 Cal Patch Puller Worm: Solid brass with strong steel fingers. Ball & Bullet Puller: Brass bore guide centers the pointed screw on the stuck bullet for easy removal, works well for removing stuck shotgun wads, sabots, and...

Thompson/Center® 209 Primer Caddy – Model 9043R Stay organized and ready in the field with the Thompson/Center® 209 Primer Caddy. Designed for convenience and protection, this silicone caddy securely stores spare 209 primers while...