Hogue 10/22 Stock .920 OD Green- OverMolded Stocks are constructed by molding a super strong, rigid fiberglass reinforced skeleton or "insert" that precisely fits the guns' action. This rigid skeleton is then OverMolded with a durable but soft synthetic...

Hogue 10/22 Stock Std Ghillie Green- OverMolded Stocks are constructed by molding a super strong, rigid fiberglass reinforced skeleton or "insert" that precisely fits the guns' action. This rigid skeleton is then OverMolded with a durable but soft...

Hogue 10/22 Stock Standard Black- OverMolded Stocks are constructed by molding a super strong, rigid fiberglass reinforced skeleton or "insert" that precisely fits the guns' action. This rigid skeleton is then OverMolded with a durable but soft synthetic...

350 Legend AICS Magazines Designed for hunters in states that allow straight wall cartridges in slug zones. Convert your bolt action rifle to 350 Legend with one of our EABCO Pre-Fit Barrels. Mount it in an MDT Chassis that accepts AICS magazines. The...

Volquartsen 19.22 Flat Trigger The 19.22 Trigger for Ruger MKIV and 22/45 enhances your shooting experience. It is designed to bring the world-class 1911 trigger feel to the Ruger MK series. Its mechanical advantage provides a crisp 90-degree break with...

Stainless AR-15 Fluted HBAR Barrel - National Match Grade Upgrade your AR-15 with our 24" Stainless Steel Fluted HBAR Barrel, designed for precision shooting with 5.56 NATO and .223 Rem (Wylde) compatibility. Featuring an 11° target crown and a 1:9...

Jam Nut for Compensators, 1/2x28, Black, .750 DiamJam nut allows locking of correct up and down index for compensators and muzzle brakes. Specifications: 1/2x28 TPI .750 OD E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

Warne HyperLite Rings Matte Black 34mm The Warne® HyperLite™ scope rings are the ultimate lightweight optic mounting solution. Crafted from Warne's exclusive MagnaFusion™ Alloy, these rings offer a staggering 35% weight reduction over...

Thompson Center Cross-Slot Base fits Contender and G2 - Matte Black-The Thompson Center made cross-slot base is a one piece base that fits the Original Contender, G2 Contender, and SSK-50 rifle and muzzleloader scope spacing. Includes mounting hardware...

TC Encore ProHunter Flextech Buttstock Features:  Black Composite TC Flextech technology Fits All TC Encore ProHunter Rifle Frames Includes Mounting Hardware Ambidextrous... Fits Right or Left Handed Shooters The T/C ENCORE® ProHunter™...

Volquartsen MKIV 22/45 Mag Release with two Base Pads- The ultimate competitors edge! Our new Extended Magazine Release for the MKIV and a 2-Pack of MKIV 22/45 Magazine Base Pads. The new Mag Release allows magazines to sit a little higher for better and...

Redding Competition Shellholder SetsCustomize the Headspace of ANY Reloading DieNow you can control headspace. The Redding Competition Shellholders are packaged in five piece sets in .002 inch increments (+.002", +.004", +.006", +.008" and +.010"). Each...

Redding Type S Bushing TiN Coated  Bushing fits Redding Competition and S-type sizer dies. Titanium Nitride (TiN) coating adds durability and lubricity. The sizing diameters are hand-polished with a surface hardness of Rc 60-62 to reduce sizing...

Manufactured by Redding Reloading, this 44 Special/44 Magnum Competition Straight Wall Seater Die features a micrometer adjustment for precise bullet seating depth and precise alignment sleeve.    Compatible with: 44 Special and 44 Magnum Die...

Redding 38-40 Winchester Competition Straight Wall Seater Die features a micrometer adjustment for precise bullet seating depth and precise alignment sleeve. 

6mm 115 Grain Very Low Drag (VLD) Hunting Rifle Bullet The Berger VLD Hunting Rifle Bullet is one of the flattest hunting bullets in the industry. They are designed to penetrate 2-3" into the vitals and then begin to expand and create a massive wound...

MDT M-LOK QD Sling Mount Std Rotation Anodized aluminum QD adaptor for attaching accessories to M-LOK compatible hand guards and forends. DETAILS Designed to allow the shooter the ability to add an additional QD mount to their forends on AR platforms and...

TC Logo Soft Sided Rifle Case- Padded, scoped rifle carrying case with 3 side pockets fits rifles up to 47'' long. Gray with black trim and embroidered with the Thompson Center Arms "TC" logo. Suitable for muzzleloaders, bolt actions, and break action...

MDT Field Stock Chassis fits CZ-455 The MDT FIELD stock chassis gives solid CZ-455 bedding at an affordable price. It has all of the advantages of a chassis but in a lighter, warmer, and more familiar feeling stock that's suitable for hunting OR...

MDT M-LOK Picatinny Rails Anodized aluminum Picatinny rails for attaching accessories to M-LOK compatible hand guards and forends. DETAILS MDT’s M-LOK Picatinny Rails are designed to be a reliable addition to our chassis systems when installing...