Hi-Viz 4.5" Fiber Optic Front Sight for the LLV/Scorpion Screws on to 4.5" Volquartsen LLV and Scorpion Uppers. These drop-in sights use existing pre-drilled & tapped holes. Mounting Screws included.

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Fits 12 ga. Remington 870 shotguns. The Mark 5 buttstock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. One-handed firing is also much easier. The stock is made of tough fiberglass filled plastic and comes with a...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

TechSights 200 Sight Set for Ruger 10/22   The TechSights 200 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the...

TC Encore PeepRib Picatinny Muzzleloader SightOur original PeepRib Aperture Sight for TC Encore, Pro Hunter, Triumph, Triumph Bone Collector, Impact and Omega combines a precision aperture sight with a scope mounting base. You can position a riflescope...

PeepRib Peep Sights for Traditions Vortek and Pursuit Muzzleloaders  Our new PeepRib Aperture Sight for Traditions Vortek and Pursuit Muzzle Loaders combines a precision aperture sight with a scope mounting base. This Peeprib works with both...

  Taco Hood for the Bond Front Sight used in handgun metallic silhouette competition. This is a 5" long tube that replaces the original short Bond hood-tube. Note: This is only the hood... It fits on your Bond Front Sight.

  The WGRS is an Aperture Sight that fits Thompson Center Arms Encore, Pro Hunter, Omega, and Impact. An aperture sight (aka peep sight), mounted as close to your eye as possible, removes a huge amount of aiming error by simply increasing the sight...

  Composite buttstock fits Original Contender/SSK-50 frames (Does NOT fit the G2).LOP 13 1/2"Hardware included.

Thompson Center Contender G2 Rifle Buttstock Composite. Fits T/C® Contender G2 frames only. Hardware included.

Adaptive Tactical 02012 EX-AR Rifle Stock, Mil Spec, BlackAdvanced design and high-impact, polymer construction make the EX Performance Adjustable Stock the ideal upgrade for AR15, AR10, or any firearm with Mil-Spec sized extension tubes*.REDUCE RECOIL...

High Fiber Optic HiViz Front Sight gives Faster Sight Acquisition- Whether you are hunting or plinking, its often hard to see your front sight against outdoor backgrounds. The fiber optic core of this HiViz front sight puts a bright glowing dot on your...

Bond Hooded Front Silhouette Sight by EABCO- Original Ralph Bond designed IHMSA Silhouette front sight manufactured by EABCO has a front post that's adjustable for width and height with a removable one inch tubular hood. This is the same sight that we...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 4.5 inch LLV...

  The TechSights 100 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the front, and approximately 7.5" more sight...