Super Fast, Titanium Firing Pins for the Ruger 10/22®A faster Lock Time translates into more accurate shooting. These Titanium firing pins are 43% lighter than steel making them move faster and cutting Lock Time to a bare minimum. In addition, they...

PeepRib Peep Sights for Traditions Vortek and Pursuit Muzzleloaders  Our new PeepRib Aperture Sight for Traditions Vortek and Pursuit Muzzle Loaders combines a precision aperture sight with a scope mounting base. This Peeprib works with both...

Warne 20 MOA Tactical Scope Mounting BasesTrue Picatinny Mil-Spec Scope Mounting Bases are Tough and Accurate  Warne Maxima 20 MOA Tactical Scope Bases are all steel, rigid and accurate one piece scope mounting bases. These "20 MOA" bases have 20...

  These kits take away the mystery of fine tuning the Ruger 10/22® action and result in a superb trigger pull and super fast lock time. The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement...

Rifle Basix Replacement Sear for Ruger Bolt Action CenterfireAdjusts from 14 oz - 2 lbs - Fits Early Bolt Action Ruger Centerfires with "Tang" Safety  Rifle Basix Ruger replacement sear produces a clean, crisp and light pull operation with...

Ruger 10/22 Accuracy Firing PinWider Impact Surface Disrupts the Rim Less, Improves Accuracy Potential  Firing pin impact plays a critical role in the accuracy of rimfire cartridges. For example, the Russians developed a 2-pin system that dominated...

  The WGRS is an Aperture Sight that fits Thompson Center Arms Encore, Pro Hunter, Omega, and Impact. An aperture sight (aka peep sight), mounted as close to your eye as possible, removes a huge amount of aiming error by simply increasing the sight...

The Ruger 10/22® Competition Sear Kit lightens the trigger pull and smooths the trigger return. Hand stoned engagement surfaces. Includes a new sear, extra power sear spring, and two .004" trigger shims. This sear, when used with proper engagement of...

The 10/22® Hammer Tune Kit produces a lighter trigger pull with a faster lock time. The sear engagement surfaces are precision ground and vapor honed. The kit includes a new hammer, extra power hammer spring, two .004" shims and a new trigger return...

This is a sling for cross shoulder carrying. An adjustable, quick release tightener loop slings your handgun at a comfortable level and the cross shoulder strap assures it won't slip off.

Turn your standard 10-round Ruger 10/22 magazines into a 3-Mag high capacity field unit with this TriMag 10/22 magazine Connector. The TriMag connects three factory Ruger 10/22 magazines into one "jungle clip" type unit. It's a very neat approach to...

Ruger 10/22 Rifle Performance Pak - Springs Extra Power Recoil Spring Extra Power Hammer Spring Extra Power Trigger Spring Reduced Power Sear Spring Upgrading your Ruger 10/22 with these springs will improve let-off and overall functioning. It is...

YoDave Marlin 336 Reduced Power Finger Lever Spring No more fighting to click the lever into the fire position on Marlin Model 1894, 1895, 336 and 444 models! Polishing the mating surfaces of the lever and the plunger as well as the addition of a reduced...

 YoDave Marlin 39A Reduced Power Hammer Spring Reduce the force required to open your lever and cycle the bolt by reducing the force of the spring acting on the hammer without sacrificing consistent primer strikes and ignition, ease of cycling is...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

YoDave CZ-457 Trigger Spring Kit  With this kit, you can reduce the CZ-457 trigger pull to approximately half of what the factory spring will adjust down to. Used in conjunction with the sear adjustment screw located on the front of the trigger...

T/C Contender G2 Locking Bolt Set (2 Pieces)  Spring loaded barrel locking bolt set for Original Contender/SSK-50 and G2 Contender. Installs under spring tension into the barrel underlug and locks the barrel into battery when the action is closed...

AR15 Tungsten Buffer Weights - It's easy to fine tune your bolt speed for optimum performance and reliability using our Tungsten Buffer Weights. Your AR15 recoil buffer has three STEEL weights inside. You simply replace the steel weights with EABCO...

MDT AICS Short Action Magazine fits 6GT - 10 Rounds - Economical polymer detachable magazine with polymer follower, this mag fits short action AICS compatible rifles and stocks. Polymer MDT External Box Magazines fit MDT Chassis systems especially well...

TC Encore 12 Ga Shotgun Cross-Slot Aluminum Base - Matte The TC Encore 12 Ga shotgun cross-slot base is strong and durable, yet lightweight and versitile.  Easily mounts to your 12 Ga Encore shotgun.     New Pictures will be added as they...