Ruger BX-15 Magazine for the Ruger 10/22  This genuine Ruger® 15 round factory magazine with Ruger® logo has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger® rotary magazine. This level of reliability...

Savage Barrel Lock Nut Lock nut to secure barrel to receiver. Screw the barrel in to set headspace, then tighten the lock nut. Precision machined to close tolerances for optimal fit, alignment, and concentricity. This nut features squared grip notches to...

T/C Encore Muzzleloader Small Rifle Primer Conversion Less Pressure to Upset Your Load - Better Accuracy Potential Seals Better - Less Blow Back Shoots Cleaner For Black Powder and Pyrodex (But NOT Blackhorn 209) Includes Modified Breech Plug and 10...

Encore M4 Buttstock Adaptor This T/C Encore Grip adapts most Mil Spec AR15/M4 buttstocks to fit the Thompson Center Encore receiver. This item is the Adaptor only and does not include an M4 Buttstock and Mil Spec Buffer Tube. E. Arthur Brown Company,...

T/C Encore 308 Extractors are Tool Steel by EABCO   The "308" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 BR, 22-250 Rem, 6mm BR, .308 Win, 7-08 Rem, 243 Win, 260 Rem, 6.5x47 Lapua, 6.5 Creedmoor, 30-06, 25-06,...

Encore Tool Steel Locking Bolts by EABCO- Precision machined tool steel barrel locking bolts for TC Encore and Pro Hunter barrels. 2014 was a worrisome time of shortages in the gun industry. We tooled up to machine these excellent locking bolts from tool...

Composite Forend for TC Encore Pro Hunter Rifle Barrels - Black Upgrade your TC Encore or Pro Hunter rifle with this versatile Composite Forend. Designed to adapt and flex to fit the barrel contours of 24", 26", and 28" barrels, this forend combines...

Increase your fire power 100% with these Magazine Connectors (magazines not included). Constructed of two steel plates on front and back and a plastic filler block in the center. This superior design has several advantages. Both magazines point upward...

The Remington 870 Rear Pistol Grip fits the Wingmaster and Express Model 870 shotguns. Makes the shotgun easier to conceal and maneuver in tight places. Angle and shape of grip gives the shotgun good control while firing.

There are several advantages to having a Remington 870 12 Ga. Pistol Grip Forend. By holding the gun in a more natural position, it is easier to control and aim. It also protects the shooter's hand from slipping off the forend during rapid fire. These...

Fits 12 ga. Remington 870 shotguns. The Mark 5 buttstock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. One-handed firing is also much easier. The stock is made of tough fiberglass filled plastic and comes with a...

Ruger BX-25 Magazine - 25 Round Ruger 10/22 Magazine   This genuine Ruger® factory magazine with Ruger® logo has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger® rotary magazine. This level of...

Imperial Dry Neck Sizing Lubricant and Application MediaRedding's Imperial Application Media with Dry Neck Lube solves the problem of lubricating case necks for the sizing operation. On the back stoke of case sizing, the expander pulls back through the...

Forster's Original Case Trimmer and Trimmer Kit  The Original, Forster Case Trimmer is the right choice for most calibers with bullet diameters from .171" to .459". It is actually a fine miniature lathe with a superior shell holder design based on a...

Forster Case Mouth Deburring Tool... Chamfers the Inside and Outside Edges After Trimming  Finish your case trimming job with a chamfered or beveled edge with this tool. Deburred case mouths seat bullets smoothly with minimal scratching.   See...

Forster Case Neck Reamer Tools   Forster neck reamers replace the pilot in the Forster case trimmer and allow inside neck reaming of the case mouths to relieve pressure. Select the reamer that matches your bullet diameter from the drop menu above...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Oversized Ruger 10/22 Bolt Handle Assembly This is a standard weight oversized bolt handle assembly for the Ruger 10/22 to be used when firing 22LR ammunition. Oversized handle is much easier to grip than factory handle and looks nicer...

Ruger 10/22® Magazine- Black- Fits the Ruger 10/22 rifle. These are original black plastic Ruger factory magazines with the rotary mechanism. Each magazine holds 10 rounds of .22LR ammo and fits flush with the bottom of the Ruger 10/22 action. We...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to fit. The wood screw stud usually goes in the...