Gifts Under $100

Savage Barrel Nut Wrench - Fits Remage Barrel Nuts Too!EABCO Barrel Nut Wrench for Savage 10 and 110 series bolt action rifles. Its a refined wrench design that our gun smiths arrived at over many installations of our EABCO Savage and Remington Accuracy...

SSK-50 Hammer Fits Original Contender and SSK-50 Receivers Fits SSK-50 firearm platforms May be compatible with TC Contender®, but due to their extreme dimensional variation, SSK cannot guarantee this. Please contact Smith & Wesson for...

  TC Contender G2 Rubber Forend Fits Thompson Center G2 12-14" pistol barrels.  Screw hole spacing approx. 3 5/16"Forend Hardware Included

Thompson CenterG1 Contender and SSK-50 Pistol Grip Composite pistol grip fits the original G1 Contender as well as the new SSK-50 frames. Comfortable ambidextrous shape with finger grooves and palm swell. Two part construction features hard plastic front...

  The WGRS is an Aperture Sight that fits Thompson Center Arms Encore, Pro Hunter, Omega, and Impact. An aperture sight (aka peep sight), mounted as close to your eye as possible, removes a huge amount of aiming error by simply increasing the sight...

Rifle Basix Replacement Sear for Ruger Bolt Action CenterfireAdjusts from 14 oz - 2 lbs - Fits Early Bolt Action Ruger Centerfires with "Tang" Safety  Rifle Basix Ruger replacement sear produces a clean, crisp and light pull operation with...

Browning Buckmark Compensator Matte Black   Originally designed for the Browning Buckmark, these Trail-Lite® Compensators are a simple addition to spruce up ANY 1/2"x28 threaded .22LR pistol or rifle. With 360 degree ports, these...

An M1 Carbine Replica Canvas Gun Case that fits the Ruger 10/22, M1 Carbine, and other rifles of similar dimensions (fits rifles up to 36" long). Available in a  lined version that still looks authentic but gives better padding and...

Oversized Ruger 10/22 Bolt Handle Assembly This is a standard weight oversized bolt handle assembly for the Ruger 10/22 to be used when firing 22LR ammunition. Oversized handle is much easier to grip than factory handle and looks nicer too! NOT for 17...

Fits Tactical Solutions Pac-Lite Barreled Uppers for Ruger MK Series Pistols. Please note: This base will not work on Factory Ruger Mk Series Pistols as the thread pitch is different for factory base screws.

    Ruger 10/22 Scope Mount with 15 MOA inclination extends the range of your Ruger 10/22 by putting 15 minutes of angle (inclination) into your scope adjustment. This enhances the elevation adjustment of your scope so that you can zero your...

Ruger Mark Series Ambidextrous Combat Low-Rise Holster. Shooters demanded it; this holster is designed to fit the Ruger® Mark Series (MK-I, MK-II, MK-III, MK-IV & 22/45) .22LR pistols with or without an optic or a suppressor. This...

Tactical Solutions 10/22® Extended Magazine Release- This sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and re-insertion. An easy swap-in...

Tactical Solutions 1022EMR-GMG Extended Magazine Release fits Ruger 10/22 Gun Metal Gray- Lever action extended magazine release for the Ruger 10/22 in Gun Metal Gray. Replaces factory magazine release and gives super leverage for easy magazine drop and...

Tactical Solutions 1022EMR-MB Extended Magazine Release fits Ruger 10/22 Matte Black- This sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and...

Tactical Solutions 1022EMR-MOD Extended Magazine Release fits Ruger 10/22 Matte Olive Drab- Lever action magazine release for the Ruger 10/22. Replaces factory magazine release and gives super leverage for easy magazine drop and re-insertion. Ruger and...

Tactical Solutions 1022EMR-QS Extended Magazine Release fits Ruger 10/22 QuicksandLever action extended magazine release for the Ruger 10/22 in Quicksand. Replaces factory magazine release and gives super leverage for easy magazine drop and re-insertion...

Tactical Solutions 1022EMR-SIL Extended Magazine Release fits Ruger 10/22 SilverThis sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and re-insertion...

T/C Contender 22 Hornet Extractors are Tool Steel by EABCOThese 22 Hornet extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Hornet cartridge. It also works with many other cartridges that have the same rim. Our...

T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...