ScopeRib III Sight System for Handgun SilhouetteReplacement hood for your ScopeRib III Sight System, used in handgun metallic silhouette competition. This is a 2.5" long tube, the same as that which comes with the ScopeRib III Sight System.  Note:...

Savage Barrel Lock Nut Lock nut to secure barrel to receiver. Screw the barrel in to set headspace, then tighten the lock nut. Precision machined to close tolerances for optimal fit, alignment, and concentricity. This nut features squared grip notches to...

T/C Encore 20 MOA Scope BaseAdds 20 Minutes Of Angle for Long Distance Shooting- Here's how it works: This Encore 20 MOA scope base adds 200 inches of elevation at 1000 yards. A typical scope that adjusts ¼" per click at 100 yards takes about 80 clicks...

Ruger 10/22 Thread Protector 1/2 x 28 Thread, .920 Dia by .400 Length - We've had so many compliments on our 10/22 Accuracy Barrel Smooth Steel Thread Protectors, we decided to offer them as a separate accessory. Made to fit rifle barrels with threaded...

Composite Forend for TC Encore Pro Hunter Rifle Barrels - Black Upgrade your TC Encore or Pro Hunter rifle with this versatile Composite Forend. Designed to adapt and flex to fit the barrel contours of 24", 26", and 28" barrels, this forend combines...

EABCO Ruger 10/22 Scope MountPrecision Machined Weaver Style Scope Mounting Base Black  Our EABCO Ruger 10/22 Scope Mounting Base is precision machined to optimize the base for the very best ring engagement, alignment, and rigidity. No molding or...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

TC Hot Shot Scope Mounting Base  Custom Weaver style Base for the Thompson Center Arms Hot Shot 22LR Mini Encore youth rifle. Fits any Weaver style scope mounting rings. Pictured above with a very reasonably priced Hawke Red Dot sight. Mount this...

Slip-Over Scope Mount for Ruger #1 Weaver Style Scope Base Slips Over Ruger No. 1 Rib  Our new "Slip-Over" Ruger #1 scope mount solves the problem of aligning an after market scope base on a contoured barrel... It uses the factory pre-aligned rib as...

Custom Modified Contender and G2 ForendModified G2 Style Composite Bull Forend fits the Original Contender/SSK-50 Carbine with non-tapered (bull) barrels as well as the G2 Contender with non-tapered bull barrels. Screw hole spacing approx. 3 9/16"...

Savage Tactical Varmint Scope Mount LA (Long Action) Black  Our new Savage Tactical Varmint One Piece Scope Mount fits Savage Rifles with rounded front and rear receiver tops. Precision machined from bar stock, these mounts have several...

ScopeRib III Sight System for Handgun Silhouette- Match grade, long range pistol sights combined with a scope mount so that you don't have to disturb the alignment of your sight system when using a scope to work up hand loads.- The ScopeRib III Sights...

Original S-Lever® Tensioner for S-Type Harris and Caldwell XLA Bipods - The Harris and Caldwell XLA "S" type bipods allow you to tilt or cant your rifle side to side to level your crosshairs. It's a great system. However, the friction tensioning...

Dummy M1 Carbine Mag Conversion for Ruger 10/22 MagsAuthentic M1 Carbine Style Base Glues Onto 10 Round 10/22 Magazine (Mag Not Included)- Give Your Ruger 10/22 a Classic Military M1 Carbine Style... These "Dummy" M1 Carbine Magazine conversions attach...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Encore Keylock Scope Base- Weaver style, fits TC Encore and Pro Hunter barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions).  Take...

Magnum Slimline Muzzle Brake Blue Installed Includes Custom Installation - Aligned to Your Barrel and Bore Includes 11 Degree Target Crown - Enhances Accuracy Potential Reduces Felt Recoil Approximately 42-45% on Up To .45 Caliber Expansion Chamber...

TC Encore PeepRib Picatinny Muzzleloader SightOur original PeepRib Aperture Sight for TC Encore, Pro Hunter, Triumph, Triumph Bone Collector, Impact and Omega combines a precision aperture sight with a scope mounting base. You can position a riflescope...

PeepRib Peep Sights for Traditions Vortek and Pursuit Muzzleloaders  Our new PeepRib Aperture Sight for Traditions Vortek and Pursuit Muzzle Loaders combines a precision aperture sight with a scope mounting base. This Peeprib works with both...