Parts & Services for Your T/C Encore Pro Hunter

TC Encore M/L Forend Screw Adapter (Standoff) Thompson Center Encore Pro Hunter muzzleloader forends attach to the barrel through the use of "standoffs". When assembled, these standoffs allow...

These three screws (two long screws 0.785" and one short 0.475") with 2 washers work on the Pro Hunter (Flex Tech) as well as standard tapered Rifle and Pistol Forends. New Flex Tech forends already...

Lowey Barrel Tuner 1/2x28 - The tuner is an adjustable muzzle weight. With it, you can precisely adjust the location/position of the weight to optimize the harmonics of your barrel and ammunition...

Thread Protector fits Large Caliber 11/16 x 24 Blued (Black) Beautiful knurled blued thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC...

Thread Protector fits Large Caliber 11/16 x 24 Stainless  Beautiful knurled stainless thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC...

T/C Encore and Pro Hunter Barrel Pivot Hinge Pins  This is the original factory hinge pin that pivots the barrel downward when you open and close your Encore or Pro Hunter action. Made from precision...

TC Encore Pro Hunter Firing Pin - S7 Steel Firing pins can sometimes chip or break and you have to replace them. These new "S7" firing pins are an improvement. The S7 steel can be tempered so it is...

T/C Encore and Pro Hunter Barrel Hinge Pin, StnlsThis stainless steel barrel hinge pin is a direct replacement the Thompson Center Encore and Pro Hunter hinge pins. Made from precision ground "drill...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost...

T/C Omega/Encore 209 Breech PlugDirect Replacement for the Original TC 7763 Breech Plug Fits Original 209x50 Encore and Omega Muzzleloaders Does

The Top or Spur of the TC Encore/Pro Hunter Swing Hammer factory TC brand, manufactured by Thompson Center to replace your original parts. Made to fit, function and perform.

T/C Grip Cap Screw factory TC brand, manufactured by Thompson Center to replace your original parts. Made to fit, function and perform.

6-48 Plug Screws Stainless (pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights...

Plug Screws for Sight Holes 6-48 Black, Two Screws Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to...

Encore Muzzle Loader Screws and WashersFor T/C Encore Muzzleloader Forends 

EABCO Forend Washers fit T/C Encore Pro Hunter- These are replacements for the tiny little Washer/Spacers under the screws on TC Encore and Pro Hunter forends. We had a devil of a time finding a...

EABCO Firing Pin SPRING fits TC Encore Pro Hunter- Replacement for the Thompson Center factory firing pin spring (that sometimes breaks). Our EABCO brand spring is made from a little thicker spring...

T/C Encore and Pro Hunter Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Encore and Pro Hunter hinge pins.  Made from precision ground "drill rod" to fit...

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa...

TC Encore/Contender Barrel Locking Bolt Spring- This is the coil spring that powers the Locking Bolts in the barrel underlug of Thompson Center Encore Pro Hunter and Contender. The locking bolts are...