T/C Encore and Pro Hunter Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Encore and Pro Hunter hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa with synthetic. One of them will fit to...

TC Encore/Contender Barrel Locking Bolt Spring- This is the coil spring that powers the Locking Bolts in the barrel underlug of Thompson Center Encore Pro Hunter and Contender. The locking bolts are compressed against this spring when you squeeze the...

T/C Extractor Leaf Spring by EABCOThis is the little leaf spring that fits against the bottom of rimless extractors on Thompson Center accessory barrels. Rimless cartridges such as 223 Remington or 308 Winchester have a special extractor that flexes...

T/C Encore 6.8 Rem SPC Extractors are Tool Steel by EABCO   The 6.8 Rem SPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6.8 Rem SPC as well as 224 Valkyrie. Our extractors are precision machined from tool steel billet...

T/C Encore 450 Bushmaster Extractors are Tool Steel by EABCO   The 450 Bushmaster extractor is used for TC Encore and Pro Hunter barrels chambered in 450 Bushmaster. Our extractors are precision machined from tool steel billet. We...

T/C Encore 45-70 Govt Extractors are Tool Steel by EABCO   Replacement extractors fit Thompson Center Encore/Pro Hunter barrels chambered for 45-70 Govt. The T/C factory extractors are molded and then machined. Our replacements are...

TC Encore Underlug Spring Roll Pin Kit- Replacements for the spring pins used in the underlug assembly of Thompson Center Encore and Pro Hunter barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Black (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One...

Thompson Center Encore/Pro HunterFiring Pin Bushing Screw Stnls (Qty 2)- Replacement for the factory screw that holds the firing pin bushing assembly in the frame. Sometimes these get rusty or lost and need replacing. This is a package of two... One for...

T/C Encore 460 S&W Mag ExtractorsPrecision Machined Tool Steel by EABCO   This "460 S&W Mag" extractor was engineered specifically for the 460 S&W cartridge... (it's not a 45 Colt/410 extractor). It fits 460 Smith and...

T/C Encore 44 Mag Extractors are Tool Steel by EABCO   The "44 Rem Mag" extractor is used for a few different TC Encore and Pro Hunter chamberings... Fits 44 Remington Magnum, 44 Special, 357/44 Baine and Davis, etc.,... to name...

T/C Encore 30-30 Extractors are Tool Steel by EABCO   The "30-30" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits 30-30 Win, 7-30 Waters, 30 Herret, 6.5mm BRM, 30-30 Ackley Improved, 6mm BRM, 375 Win, 7mm...

T/C Encore 223 Extractors are Tool Steel by EABCO   The "223" extractor is used for several different TC Encore and Pro Hunter chamberings... Fits .223 Rem, 5.56 Nato, 300 Blackout, 221 Fireball, .222 Rem, 17 Fireball, 17 Mach IV, 7mm TCU, 204...

T/C Encore 300 Win Mag Extractors are Tool Steel by EABCO   The 300 Win Mag extractor is used for TC Encore and Pro Hunter barrels chambered in 300 Winchester Magnum and 7mm Remington Magnum. Our extractors are precision machined...

T/C Encore 35 Whelen Extractors are Tool Steel by EABCO   The 35 Whelen extractor is used for TC Encore and Pro Hunter barrels chambered in 35 Whelen. Our extractors are precision machined from tool steel billet. We...

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...

TC Encore Pro Hunter Pistol Case Black  Designed and dimensioned specifically to fit the Encore handgun with barrels up to 15" length - even when scoped. Includes two inside pockets for extra barrels. Padded and lined to provide maximum protection...