Thread Protector fits Large Caliber 11/16 x 24 Blued (Black) Beautiful knurled blued thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC ProHunter large caliber barrels (over 30 cal) like the 360...

Thread Protector fits Large Caliber 11/16 x 24 Stainless  Beautiful knurled stainless thread protector in 11/16x24 thread with length of .625" and outside diameter of .820" Compatible with new TC ProHunter large caliber barrels (over 30 cal)  

TC Encore 209x50 & Omega Breech Plug - The first breech plug design for TC Encore "209X50" muzzleloading barrels. Later TC came out with the Omega muzzleloader and used this same breech plug. Compare the photo with your old breech plug to be sure you...

Speed Breech XT Breech Plug For Thompson Center Pro Hunter Endeavor Barrels Introduced under the "Endeavor" name, the Speed Breech XT breech plug fits Thompson Center muzzleloader barrels that are specifically made for this breech plug. Please compare...

Encore Pro Hunter Speed Breech Plug (Original) - Originally introduced on muzzleloader barrels with the Pro Hunter label, the original Speed Breech combines engine piston style sealing rings with an O-ring and a quicker breechj plug removal system...

TC Encore ProHunter FX Speed Breech 3 Speed Beech 3 breech plugs require no tools, and spin out by hand for easy cleaning.  The TC Encore FX is the fixed version, which requires a specific FX Speed Breech 3 plug.  Replace your existing breech...

TC Encore Pro Hunter Firing Pin - S7 Steel Firing pins can sometimes chip or break and you have to replace them. These new "S7" firing pins are an improvement. The S7 steel can be tempered so it is both hard and tough... Making these firing pins more...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* SPEEDLOCK Hammer Spring - Gives More Reliable Primer...

TC Encore Pro Hunter Headspace Shims Headspace is the distance from head of a cartridge to the breech face. You can fine tune the headspace of your Encore or Pro Hunter with these "shims". The SAAMI specified headspace allows up to .010" of variance in...

T/C Encore and Pro Hunter Barrel Hinge Pin, StnlsThis stainless steel barrel hinge pin is a direct replacement the Thompson Center Encore and Pro Hunter hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

These Pro Hunter screws (two long screws 0.785") with washers work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws and washers so, if you are ordering a new forend, you do not need to order these screws. We...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* Heavy Duty Hammer Spring - Gives More Reliable Primer...

These Pro Hunter screws (two long screws 0.785") work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer them only because...

6-48 Plug Screws Stainless (pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 6-48 thread Blue Plug Screws fit the most standard firearm...

Plug Screws for Sight Holes 6-48 Black, Two Screws E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Encore Muzzle Loader Screws and WashersFor T/C Encore Muzzleloader Forends  The screws and washers needed to attach the Muzzle Loader forend. Includes two (2) forend screws with two (2) washers. These screws fit factory composite and/or wood as well...

  This Allen Head screw kit includes one long screw 0.785", one short screw 0.475", and two washers.  This hardware kit is specifically made for the 127-7661 or 317-09-02-16 Forends.  These screws do NOT fit muzzle loader nor shotgun...

EABCO Forend Washers fit T/C Encore Pro Hunter- These are replacements for the tiny little Washer/Spacers under the screws on TC Encore and Pro Hunter forends. We had a devil of a time finding a source for them and they are expensive. Forend washers are...

EABCO Firing Pin SPRING fits TC Encore Pro Hunter- Replacement for the Thompson Center factory firing pin spring (that sometimes breaks). Our EABCO brand spring is made from a little thicker spring stock to give better durability. Expansion power and...