RUGER MARK IV 22/45

Game Changer Rimfire Compensator  The Game Changer has gas ports on the top and sides so it stabilizes the muzzle and virtually eliminates muzzle rise. With no ports on the bottom, it's important to mount the game changer with the ports...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

CNC-Machined Disconnector for MK IV This MKIV Disconnector is CNC-Machined from 416 stainless steel (the factory disconnector is a sheet metal stamping). The machining process allows several design changes to the the way the disconnector functions. We...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

Ruger MK II/III/IV Picatinny Scope Mount Rail by Majestic ArmsLow Profile Does Not Interfere with Iron Sight Picture!  Precision machined, true Mil-Spec Picatinny Rail for mounting a scope, red dot, or laser on your Ruger MK Pistol. Fits Ruger Mk I,...

McFadden Ultimate Clip Loader for Ruger Mk II/III/IV Pistols-The Ultimate Clip Loader is for speed loading Ruger Mk II, III, IV, and 22/45 Magazines. Load the hopper with up to 50 rounds of 22 ammo. Shake the loader to align the shells. Then just slip...

Ruger Mark Series Ambidextrous Combat Low-Rise Holster. Shooters demanded it; this holster is designed to fit the Ruger® Mark Series (MK-I, MK-II, MK-III, MK-IV & 22/45) .22LR pistols with or without an optic or a suppressor. This...

Ruger Mark IV Pistol Trigger Shims These trigger shims fit Ruger Mark I, II, III, IV & 22/45 Pistols. They install on the Left Side of the Trigger, between the Trigger and the #AN37 Bolt Stop Assembly. Installing a Shim here will stop the Trigger...

Picatinny Rail for Ruger MK IV This rail can be mounted in two directions, allowing the rear sight to stay mounted; when reversed, it will cover the rear sight dovetail. Fits factory Ruger MKIII and MK IV uppers. Mounts in Two Directions Fits Ruger MKIV...

Bolt Tune Up Kit for Ruger MKII, MKIII, MKIV, and 22/45 Improve the reliability of feeding, firing, and ejecting on your pistol... Eliminate light strikes and stovepipes. This very simple upgrade, replaces the mass production stamped sheet metal parts in...

The Ultimate Trigger Kitfor the Ruger MKIV & MKIV 22/45 RedThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45™ is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

Krossfire Bolt for Ruger® Mark IV™ & 22/45™ A TandemKross Bolt with Black DLC Finish Assembled with TandemKross Firing Pin, Extractor, and Guide Rod Includes Integral Halo Charging Ring for Improved Clearing and Charging Upgrade...

Ruger MKIV Frame Lug This lug is precision machined for improved fit. Slight variances to the factory lug (as shown with the yellow circle in the additional image) can cause unnecessary wear to the Mark IV upper as well as aftermarket uppers like the...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Cthulhu Grip Frame fits All Ruger MKIV Barrels No FFL Required All Aluminum Lower Frame for Ruger MKIV Completely Assembled w/TandemKross Competition Parts Drop-In Ready... Fits All Ruger Mark IV Barrels Drop-In Ready... Fits All Ruger Mark IV 22/45...

Cthulhu Frame fits All Ruger MKIV Barrels No FFL Required All Aluminum Lower Frame for Ruger MKIV Completely Assembled w/Tandem Kross Competition Parts Drop-In Ready... Fits All Ruger Mark IV Barrels Drop-In Ready... Fits All Ruger Mark IV 22/45...

Mark IV™, Mark III™ & 22/45™ Picatinny Rail Factory 1913 style picatinny rail for Mark IV™, Mark III™ and 22/45™. Rail fits firearms with factory pre-drilled receivers. Includes three screws. (Does not fit Mark I and Mark II™ pistols.) Genuine...

Volquartsen Mamba VC4LLV-4 Competition Upper 4.5'' fits Ruger MKIV and MKIV 22/45- This replacement barrel ("upper") is a superb upgrade for your Ruger MK IV. It's extremely lightweight, well-balanced, and offers match grade accuracy. The Volquartsen...

The Ultimate Trigger Kit for the Ruger MKIV & MKIV 22/45 BlackThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45 is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...