TC Contender Parts

T/C Contender G2 Locking Bolt Set - Tool Steel by EABCO- Precision machined tool steel barrel locking bolts for TC Contender and G2 Contender barrels. 2021 was a worrisome time when S&W announced they were quitting the Thompson Center brand. We could...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

T/C Contender G2 Locking Bolt Set (2 Pieces)  Spring loaded barrel locking bolt set for Original Contender/SSK-50 and G2 Contender. Installs under spring tension into the barrel underlug and locks the barrel into battery when the action is closed...

SSK-50 Hammer Fits Original Contender and SSK-50 Receivers Fits SSK-50 firearm platforms May be compatible with TC Contender®, but due to their extreme dimensional variation, SSK cannot guarantee this. Please contact Smith & Wesson for...

T/C Contender 22 Hornet Extractors are Tool Steel by EABCOThese 22 Hornet extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Hornet cartridge. It also works with many other cartridges that have the same rim. Our...

T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

T/C Contender 22 LR Extractors are Tool Steel by EABCOThese 22 LR extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 LR cartridge. Our extractors are precision machined from tool steel forging. We install these...

T/C Contender 30-30 Winchester Extractors are Tool Steel by EABCOThese 30-30 Winchester extractors are used for TC Contender and G2 Contender barrels that are chambered for the 30-30 Winchester cartridge. Our extractors are precision machined from tool...

T/C Contender 35 Remington Extractors are Tool Steel by EABCOThese 35 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 35 Remington cartridge. Our extractors are precision machined from tool steel billet...

T/C Contender 357 Magnum Extractors are Tool Steel by EABCOThese 357 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 357 Magnum, 357 Maximum, 38 Special, 7mm SuperMag, and any other cartridges that have the...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 6.8 Remington SPC Extractors are Tool Steel by EABCOThese 6.8 Rem SPC extractors are used for TC Contender and G2 Contender barrels that are chambered for the 6.8 Remington SPC cartridge. It also works with other cartridges that have the...

TC Contender G2 Pistol Case Black  Designed and dimensioned specifically to fit the TC Contender and G2 handgun with barrels up to 16" length - even when scoped. Includes two inside pockets for extra barrels. Padded and lined to provide maximum...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

T/C Contender PartsParts to fit G1 and G2 Contenders, SSK-50 270-CRC14 - Firing Pin Bushing, Contender, G2, SSK-50 270-CRC15 - Firing Pin Rimfire, Contender, G2, SSK-50 270-CRC15A - Firing Pin Centerfire, Contender, G2, SSK-50 270-CRC16 - Bushing Screw,...

TC Contender and G2 Headspace Shims Headspace is the distance from head of a cartridge to the breech face. You can fine tune the headspace of your G1 or G2 Contender with these "shims". The SAAMI specified headspace allows up to .010" of variance in the...

TC Encore Pro Hunter Headspace Shims Headspace is the distance from head of a cartridge to the breech face. You can fine tune the headspace of your Encore or Pro Hunter with these "shims". The SAAMI specified headspace allows up to .010" of variance in...

Universal Forend Screw KitReplacements For Original and Contender G2 Forends- The screws are in lengths we use here in the shop. The spacer washers solve the problem of screws bottoming out before the forend is completely tight. With this kit, you should...