Redding 6.5MM Remington Mag Neck Sizing Dies Neck Sizing Dies are a special resizing die that leaves the cartridge body fire-formed and only resizes the case neck (Not recommended for reloading ammunition to be used in single shot firearms). Advanced...

Redding 6.5/284 Norma(Win) C-II Type S Bushing Die FL Sizer uses the same interchangeable bushings (.001" increments) as those used in our bushing style neck sizing dies. Adjustable decapping rod allows you to adjust the bushing position, sizing only...

Redding 223 Rem C-I Type S Bushing Dies Neck Sizer Interchangeable Bushings Compensate for Differences in Cartridge Brass Thickness.   The amount of resizing provided by conventional reloading dies has  always been dictated by the manufacturing...

Redding 308 Win C-I Type S Bushing Dies Neck Sizer Interchangeable Bushings Compensate for Differences in Cartridge Brass Thickness.   The amount of resizing provided by conventional reloading dies has  always been dictated by the manufacturing...

Redding 270 Win C-I Type S Bushing Dies Neck Sizer Interchangeable Bushings Compensate for Differences in Cartridge Brass Thickness.   The amount of resizing provided by conventional reloading dies has  always been dictated by the manufacturing...

Redding 6mm PPC USA C-I Type S Bushing Dies Neck Sizer Interchangeable Bushings Compensate for Differences in Cartridge Brass Thickness.   The amount of resizing provided by conventional reloading dies has  always been dictated by the...

Redding Competition Bushing Neck Dies Category I These dies are designed to resize your case necks just enough to retain the bullet when you seat it. Unlike traditional full length and neck sizing dies, these "Bushing Dies" don't over-squeeze the neck...

Redding Competition Bushing Neck Dies Category I These dies are designed to resize your case necks just enough to retain the bullet when you seat it. Unlike traditional full length and neck sizing dies, these "Bushing Dies" don't over-squeeze the neck...

The Redding 7mm Rem UM C-II Competition Seating Die features a micrometer adjustment for precise bullet seating depth and precise alignment sleeve

EABCO Firing Pin SPRING fits TC Encore Pro Hunter- Replacement for the Thompson Center factory firing pin spring (that sometimes breaks). Our EABCO brand spring is made from a little thicker spring stock to give better durability. Expansion power and...

T/C Contender G2 Locking Bolt Set - Tool Steel by EABCO- Precision machined tool steel barrel locking bolts for TC Contender and G2 Contender barrels. 2021 was a worrisome time when S&W announced they were quitting the Thompson Center brand. We could...

T/C Contender and G2 Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Contender and G2 Contender hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

EABCO Picatinny Scope Mount fits Ruger 10/22- This Precision Machined 10/22 Picatinny Rail mounts to your existing 10/22 scope mounting holes and gives superior alignment and rigidity for the best accuracy potential. It's totally machined from aircraft...

Ruger 10/22® Extended Mag Latch Release - 90598This 10/22® Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading...

AR15 Barrel Nut by CMMG

CMMG Crush Washer, 1/2" - 55DA5B8

CMMG Screw, 1/4-24 x 1"Lg., Pistol Grip, AR15 - 55CA563

CMMG Spring, Detent Receiver Pivot/Takedown, AR15 - 55CA581

CMMG Firing Pin Retainer, M16 - 55BA4C5

CMMG Spring, Action, Carbine, AR15 - 55CA9A2- This is the spring that goes in the AR15 buffer tube. Also referred to as the buffer tube spring.