Machined Parts

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa with synthetic. One of them will fit to...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

Savage Accuracy Recoil Lug - Matte Stainless Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

EABCO Firing Pin SPRING fits TC Encore Pro Hunter- Replacement for the Thompson Center factory firing pin spring (that sometimes breaks). Our EABCO brand spring is made from a little thicker spring stock to give better durability. Expansion power and...

These Pro Hunter screws (two long screws 0.785") work on the Pro Hunter (Flex Tech) Rifle Forends. New Flex Tech forends already include these screws so, if you are ordering a new forend, you do not need to order these screws. We offer them only because...

6-48 Plug Screws Stainless (pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 6-48 thread Blue Plug Screws fit the most standard firearm...

TC Contender Underlug Roll Pin Kit- Replacements for the roll pins used in the underlug assembly of Thompson Center Contender and G2 Contender barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

KAK Crush Washer 9/16x24 fits AR15 350 Legend - Often, 350 Legend Barrels are threaded 9/16x24 to avoid mounting a 22 or 30 caliber brake.- Our KAK Crush Washer 9/16x24 allows DIY-ers to time their muzzle treatments onto their threaded barrels.9/16 x...

AR-308 DPMS LR-308 M5 Barrel Nut- Barrel nut for 308 sized AR Rifles, fits DPMS LR-308 and Aero Precision M5 spec uppers. Inside diameter is 1.210''.

TC Encore Underlug Spring Roll Pin Kit- Replacements for the spring pins used in the underlug assembly of Thompson Center Encore and Pro Hunter barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

EABCO CVA Scout PeepRib Set (Includes Front Sight)- Our original PeepRib Aperture Sight is now available for the CVA Scout centerfire rifle. The PeepRib combines a precision aperture rear sight with a scope mounting base. You can position a...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

ScopeRib III Sight System for Handgun Silhouette- Match grade, long range pistol sights combined with a scope mount so that you don't have to disturb the alignment of your sight system when using a scope to work up hand loads.- The ScopeRib III Sights...

Plug Screws for Sight Holes 6-48 Black, Two Screws E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

Savage Accuracy Recoil Lug - Bright Stainless Replaces stamped Savage recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Savage factory recoil lugs are stamped not machined. Their...

Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

T/C Contender/SSK-50 Barrel Hinge PinThis stainless steel barrel hinge pin is a direct replacement for the Thompson Center Contender and SSK-50 hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to swap...

8-40 Plug Screws Blue (Pair) Plug screws fill in sight holes when you remove the sights. They screw in flush, look nice, and protect the threads in case you ever want to re-mount the sights. 8-40 thread Blue Plug Screws fit the  front sight holes...