Redding T-7 Turret Reloading Press - Near progressive reloading speed w/match accurate rigidity and alignment.
Reloading Home * Thompson
Center Arms *
Lapua and VihtaVuori *
Bushnell Rifle Scopes
|
©2001-2021 E. Arthur Brown Co., CONTACT US , 4088 County Road 40 NW,
Garfield, MN 56332
ph. 800-950-9088, FAX 320-852-2871 , Orders Only Toll Free
1-800-950-9088
 |
LIKE on |
 |
Follow us on Twitter |
 |
Read our Reviews |
 |
 |
Redding T7 Turret Style Reloading Press
Loads Nearly as Fast as a Progressive Press but with Match Accurate Precision
Redding Reloading Home
|
 The T-7 is the most advanced turret
press in the world. With 7 die stations, you can set up
reloading for several die stages or multiple cartridges.
Switch from die to die without re-adjusting by just
pivoting the turret. The massive cast iron base and turret
are hardened and precision ground for absolute rigidity
and alignment. The T-7 accepts all standard 7/8x14 thread
reloading dies and shellholders. The large diameter ram is
powered by compound leverage to form even the toughest
brass reliably. Spent primers drop through the ram and out
a tube. A Smart Primer arm is included or you can upgrade
to the optional Slide Bar primer system (pictured on the
press at right) for faster, and higher volume primer
seating. The beauty of the turret is that dies for each
stage of reloading are already set-up as though you had a
separate press for each. You can load one round from start
to finish by pivoting the dies into place. Or, you can load
100 rounds efficiently by batching operations. No time is lost in changing the press over
to the next operation... just pivot the turret. If you've
been reloading on a cheap press that moves and flexes, you will
be astounded by the T-7. Its massive compound leverage and cast
iron rigidity make case forming a breeze. |
ORDER 722-67000 Redding T-7 Press with Primer Arm |