Rifle Basix LV-1K Varmint Trigger for Remington 700- Varmint Grade Replacement Trigger includes a new safety and bolt stop release. Adjusts from 8oz-24 oz and fits Remington 700, 721, 40X, etc. Rifle Basix after-market triggers feature state of the...

Rifle Basix Trigger ERV-3 for Remington Rifles Varmint and Target Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 4oz. to 1.25 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061...

Rifle Basix Trigger L-3 for Remington Rifles (Silver Finish)Target Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 2 oz to 6 oz. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061...

Rifle Basix Trigger L-3 for Remington Rifles Target Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 2 oz to 6 oz. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061 housings, internal...

Rifle Basix Trigger LV-1 for Remington Rifles (Silver Finish)Varmint Grade, Fits Remington 700, 40X, 7, and XR-100.  Adjusts from 8 oz to 1.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet...

Rifle Basix Trigger LV-1 for Remington RiflesVarmint Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 8oz to 1.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061 housings,...

Rifle Basix Trigger L-1 for Remington Rifles (Silver Finish)Hunter Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 1.5 lbs to 3.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined...

Rifle Basix Trigger L-1 for Remington RiflesHunter Grade, Fits Remington 700, 40X, 7, and XR-100. Adjusts from 1.5 to 3.5 lbs. Uses Factory Safety  Rifle Basix Remington triggers feature state of the art CNC machined billet T6-6061...

The standard Encore forend screws (one long screw 0.785", one short screw 0.475") fit the Encore Rifle Forends (Not the Pro Hunter Rifle Forends). Note:  The standard Encore PRO HUNTER screws (two long screws) work on the Encore Pro Hunter (Flex...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

Warne Maxima Scope Mounting Bases2-Piece and 1-Piece Steel Weaver Style Scope Bases  Warne Maxima Scope Mounting Bases are rigidly strong and perfectly aligned. They attached firmly with Torx screws, too. Specially made to fit Warne Maxima Rings,...

Ruger Mark Series Ambidextrous Combat Low-Rise Holster. Shooters demanded it; this holster is designed to fit the Ruger® Mark Series (MK-I, MK-II, MK-III, MK-IV & 22/45) .22LR pistols with or without an optic or a suppressor. This...

TechSights 200 Sight Set for Ruger 10/22   The TechSights 200 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the...

  The TechSights 100 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the front, and approximately 7.5" more sight...

Dead Center BulletsMuzzleloaders are limited in velocity by the physics of the gun and the limitations of the components. The only place left to increase performance is through bullet design... Introducing the Dead Center Bullet. Dead Centers are...

Shotgun Forend Screws fit Laminated TC Encore Forends  - All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special screws and washers.-To...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Contender Keylock Scope Base- Weaver style, fits TC Contender and G2 Contender barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions). Take...

Original TC Encore Keylock Scope Base- Weaver style, fits TC Encore and Pro Hunter barrels. World famous for its toughness, the Keylock one-piece base is precision machined from solid aluminum billet (no cheapy play-doh factory extrusions).  Take...

 Mil Spec Picatinny Ruger 10/22 Scope Mount. This Tactical Ruger 10/22 mount is precision machined to meet Mil Spec Picatinny (Weaver style) dimensions, mounts with four screws (included) and is finished matte black. You'll need a good set of rings....