MDT AICS 300 Win Mag Magazines 3.715"MDT Metal 300 Winchester Magnum AICS magazines are manufactured from high strength steel and finished with Cerakote Elite for the ultimate in durability and corrosion resistance. Compatible with AICS pattern DBM...

Plug Screws for Sight Holes 6-48 Black, Two Screws E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

MDT M-LOK ARCA Rail 3.3 Inch Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail. This handy 3.3 inch ARCA rail attaches to any rifle, handguard, or chassis with M-LOK slots. ARCA Swiss adapters have become the standard for...

ORYX Chassis Stock fits Savage Axis SA/RH - Black Chassis panels come in Black Weight: 4.2lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK pattern slots...

CZ Magazine 12004 fits 457, 455, Etc - 22 LR, 17 HM2, 10 Rnd, PolymerFactory replacement magazine for CZ 455, CZ 457, CZ 453, CZ 452, and CZ 512

T/C Contender and G2 Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Contender and G2 Contender hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

Ruger 10/22® Extended Mag Latch Release - 90598This 10/22® Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading...

T/C Encore and Pro Hunter Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Encore and Pro Hunter hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

CVA Muzzleloader Front Sight .485 Height- One piece metal ramp front sight attaches with one 6-48 screw. Orange fiber optic makes it easy to see in low light and woods hunting. Fits a typical CVA .875" diameter muzzleloader barrel. This .485" height...

Jard Trigger fits Savage A17/A22 Rimfire fits 22LR/17HM2 Rifles- At last there's a replacement trigger for the remarkable Savage A17/A22 Rimfire... 22LR/17HM2! The JARD Savage A17/A22 Trigger System brings JARD’s exceptional trigger performance to...

MDT Adjustable Vertical Grip Elite fits AR10/15 and Oryx, Black Colored- This Vertical Grip Elite is the most adjustable grip currently available for the AR-15 grip interface. Adjusting the grip position enables the shooter to properly position their...

Composite Buttstock fits Thompson Center Encore frames as well as TC Pro Hunter and TC Endeavor framesFits Pro Hunter FramesFits Encore and Endeavor FramesHigher Cheek Rest for Scope UsePlain Choate Grip Cap  (does not have TC logo grip...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

Choate Varmint Stock fits Savage 10 Series Short Action, Staggerfeed A VERY unique riflestock designed by Maj. John Plaster (U.S. Army ret.), one of the worlds leading authorities & instructors in long range very accurate shooting. This stock fits...

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...

Remington 700 Accuracy Recoil Lug - Bright Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN...

Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

EABCO Remage Barrel Nut – Precision Fit for Remington 700 Pre-Fit Barrels The Remage Barrel Nut is at the heart of our re-barreling system for the Remington 700, allowing it to use a pre-fit barrel system without modifying the receiver. This nut...

Contender M4 Buttstock Adapter This T/C Contender/SSK-50 Grip adapts most Mil Spec AR15/M4 buttstocks to fit the Thompson Center Contender receiver. This item is the Adapter only and does not include an M4 Buttstock and Mil Spec Buffer Tube.

Choate Tactical Stock for Savage Version II Left Hand Fits Detachable Mag Rifles Where the Latch is on the Magazine Full length bedding block (see cutaway picture) Fits Detachable Mag Rifles where the latch is on the mag Adjustable butt spacer system to...