Shop by Model

TC Contender G2 Pistol Case Black  Designed and dimensioned specifically to fit the TC Contender and G2 handgun with barrels up to 16" length - even when scoped. Includes two inside pockets for extra barrels. Padded and lined to provide maximum...

TC Encore Pro Hunter Pistol Case Black  Designed and dimensioned specifically to fit the Encore handgun with barrels up to 15" length - even when scoped. Includes two inside pockets for extra barrels. Padded and lined to provide maximum protection...

Volquartsen Accessory Rail for LLV Barrels  Under barrel Picatinny accessory rail fits both Picatinny and Weaver style accessories. Mounts with two 8-32 screws under LLV barrels. Newer Volquartsen LLVs are pre-drilled and tapped. We can...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

Hogue Polymer AR15 Trigger Guards with Hardware  Curved trigger guard gives more finger room and is a direct replacement for the straight AR15 trigger guard. Available in Black, Flat Dark Earth, and OD Green, they add a nice custom look to your...

Standard AR15 A2 Flash HiderScrews on to your threaded barrel. 1/2x28 tpi. Overall length approximately 1.75 inches. Also works great as a thread protector.  

Colt AR15/M16 Lower Receiver Offset Adaptor PinEasily adapts Colt large pin lowers to fit standard small pin AR15 upper receivers, ensuring a precise, tight fit. Key Features: Compatibility: Designed to bridge older Colt large pin lowers with modern...

AR10 Accuracy Barrel® 6.5 Creedmoor by EABCO- Our DPMS compatible 6.5 Creedmoor AR-10 Accuracy Barrel® is a Heavy Profile, Long Range PRS style upgrade that will maximize the range and accuracy of your AR-10 rifle. We've engineered it around the...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 4.5 inch LLV...

  A JARD Replacement Trigger is designed and intended for you to be able to install it yourself. However, if you would prefer to have EABCO gunsmiths install it for you, we would be more than happy to do it and of course we'll do a good job. Please...

JARD 10/22 Trigger Spring Kits  Replacement springs for JARD brand Ruger® 10/22 Triggers. You can order these spring kits to change the pull weight for different situations, like hunting or target shooting.Ruger® and 10/22 are...

AR-15 and AR-10 Top Adjustable Single Stage Trigger System Small Pin, Speed Hammer... Fits All Brands Except ColtThe JARD AR-15 Top Adjustable Trigger System will let you fine tune your trigger the way you like it easily from the top side of trigger...

The JARD Ruger® Precision Rifle™ Trigger is an easy way to improve your trigger pull.  This trigger upgrade gives you adjustability that the original factory trigger does not allow.Order your Trigger  below by selecting the trigger pull...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. The Exact...

JARD Adjustable Ruger® 10/22® Trigger Assembly Black- Adjustable over travel and sear engagement with faster lock time for your Ruger 10/22. The pivot point for the hammer is located higher in the assembly to give a shorter travel and shorter...

Ruger No 1 Trigger Replacement 1 lb. Pull  Replaces the factory trigger, transfer bar, and sear with a better, one-piece design. It pivots off the factory sear pivot point instead of the original trigger pivot point, giving a mechanical advantage...

 Tech Sights Spanner Wrench for Model 100 & 200 Sights TS211 Sight Tool for Adjusting TS220      The TS2ll Sight Tool allows for the following adjusting on the Tech Sights: Detent tip for Ruger TSR100 & TSR200...

Guntec Short Accessory RailExtra Rail Fits AR15 Free Float Handguards- Short, 2¾ inch Picatinny Accessory rail to fit Guntec Free Float handguards. Comes with two mounting screws and mounts in the grooves on the bottom and sides of the Free Float...

AR15 barrel nut shim for free float handguard/quad rail. • Helps improve torque, timing, indexing, alignment of barrel nut • This 0.32mm stainless steel shim fits between the barrel nut and upper receiver • Works with .223/5.56/300 AAC Blackout • Does...

Tandemkross "Victory" Trigger, BlackReplacement for Ruger Mk III and Mk IV 22/45Features at a Glance:Flat faced for better control and feel100% Adjustable for pretravel and overtravelLightweight skeletonized designFits MKIII or MKIV, Original or...