Shop by Model

T/C Encore and Pro Hunter Barrel Hinge Pin, StnlsThis stainless steel barrel hinge pin is a direct replacement the Thompson Center Encore and Pro Hunter hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal...

CZ-457 Head Space Bolt Shim Kit Custom tune the head space on your CZ-457. Factory rifles and aftermarket barrels are made to head space within a very narrow dimension called "SAAMI Spec". And that's all they normally need to shoot accurately and...

MDT Field Stock Chassis fits Ruger American Short Action - Black Get more accuracy out of your factory rifle by upgrading with the Field Stock. The traditionally shaped polymer stock provides comfort and warmth in cold weather. Improve accuracy with the...

Savage Factory Magazines 4-Shot Short Action Matte Blued Finish Improved Latch System Compatible with:Savage AXISLightWeight HunterTrophy Hunter XP/10Trophy Hunter XP/11Lady Hunter/11Hunter XP/16Trophy Hunter XP/110Engage Hunter XP/11DOA Hunter...

Savage AICS Bottom Metals These are the Savage OEM Premier direct drop-in bottom metals that fit the Savage Accu-Stock and others with the factory Accu-Stock compatible inletting. Fits Savage 10/110 Model Accu-Stock Does NOT Fit Axis Models Fits Rifles...

MDT Field Stock Chassis fits Savage Axis SA The MDT FIELD stock chassis gives solid Axis bedding and AICS magazine compatibility at an affordable price. It has all of the advantages of a chassis but in a lighter, warmer, and more familiar feeling stock...

Lever Gun Torx Screw KitsUpgrade Your Henry, Marlin, or Rossi Rifle For years the gun industry has used slot headed screws for the receivers on guns. Back in the day, tooling and fabrication what it was, it was about the only choice. These days we have...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

DURAMAG SS 400 LEGEND Magazine - 5 Rnds A Legendary caliber deserves a legendary magazine and the 400 Legend Duramag SS delivers the only purpose built magazine for this caliber. With these Duramag SS mags you’re getting 400 Legend specific rib...

TC G1 Contender/SSK-50 Composite Buttstock - Full length Montecarlo styled buttstock fits original G1 Contender and SSK-50 frames (Does NOT fit the G2). Rigid and weatherproof composite construction with pistol grip and Limbsaver recoil pad. Includes...

ORYX Chassis Stock fits Remington 700 LA/RH - BLACK Mag Compatibility: 3.715" AICS magazines   aPlease check the size of your Long Action AICS Magazine...       (It's stamped right on it. Make sure it will...

ORYX Chassis Stock fits Savage Axis LA/RH - BLACK Chassis panels come in BLACK Weight: 4.2 lbs LOP: 13 - 13.5" (Additional LOP with our spacer kit) Material: 6061 Finish: MIL Spec Type III hard anodize Accepts Standard Grips (included) M-LOK pattern...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

YoDave CZ-457 Plus 10 Striker Spring Achieve more reliable ignition when you install this 10% stronger striker spring in your CZ-457 bolt. Refer to your CZ-457 manual for disassembly and replacement of the factory spring. If you are experiencing...

Volquartsen Lightweight Carbon Fiber 10/22 Barrel The Lightweight Carbon Fiber Barrel sets the standard for a lightweight barrel - bull barrel match accuracy at half the weight! A stainless steel barrel fitted with a woven carbon fiber tube creates an...

T/C Omega/Encore 209 Breech PlugDirect Replacement for the Original TC 7763 Breech Plug Fits Original 209x50 Encore and Omega Muzzleloaders Does NOT fit Pro Hunter, Endeavor, FX, nor Speed Breech Uses Standard 209 Primers If you've been looking for a...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

6.8 Rem SPC AR15 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 6.8 Rem SPC, 400 Legend, 224 Valkyrie, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for excellent durability and...