T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...

TC Contender Underlug Roll Pin Kit- Replacements for the roll pins used in the underlug assembly of Thompson Center Contender and G2 Contender barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

TK Bolt Keeper Extended Bolt Release fits Ruger 10/22®- A drop-in upgrade for your 10/22 Bolt Release, the TK Bolt Keeper mounts a nice big KNOB to the bolt release... Making it easy to find and reliable to operate. Tip the knob in to release and out...

Ruger® 10/22® Mag Dropper™ II Magazine Release SilverNew and Improved Version II Mag Dropper literally DROPs Ruger 10/22 Magazines with the press of your trigger finger or thumb. Magazines are easily released out of the magazine well when...

T/C Contender 357 Magnum Extractors are Tool Steel by EABCOThese 357 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 357 Magnum, 357 Maximum, 38 Special, 7mm SuperMag, and any other cartridges that have the...

T/C Contender 22 Hornet Extractors are Tool Steel by EABCOThese 22 Hornet extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Hornet cartridge. It also works with many other cartridges that have the same rim. Our...

T/C Contender 6.8 Remington SPC Extractors are Tool Steel by EABCOThese 6.8 Rem SPC extractors are used for TC Contender and G2 Contender barrels that are chambered for the 6.8 Remington SPC cartridge. It also works with other cartridges that have the...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

High Tower Magazine Coupler fits Ruger® 1022® Magazines- This magazine coupler connects two 10 round Ruger 10/22 magazines bottom to bottom (mags not included). This makes a 20 round unit that conforms to "10 round legal" restrictions because you...

T/C Contender 35 Remington Extractors are Tool Steel by EABCOThese 35 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 35 Remington cartridge. Our extractors are precision machined from tool steel billet...

HIVIZ® LiteWave® Front and Rear Sight Combo for Ruger 10/22 rifles. - Fast sight acquisition is what these HiViz sights are all about. The fiber optic LiteWave Lite Pipes gather and concentrate ambient light so that it shines bright out the end.....

Tactical Solutions 10/22® Extended Magazine Release- This sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and re-insertion. An easy swap-in...

Tactical Solutions 1022EMR-SIL Extended Magazine Release fits Ruger 10/22 SilverThis sleek looking lever action magazine release for the Ruger 10/22 replaces the factory magazine release and gives super leverage for easy magazine drop and re-insertion...

"Red" Recoil BufferEasy Installation No Modifications  The best way to protect your Ruger 10/22 receiver from damage caused by the metal bolt impacting the aluminum receiver each time you fire the rifle is to install one of these custom bolt buffers...

Tactical Solutions X-Ring Performance Barrel fits Ruger 10/22 SilverChambered in .22 Long Rifle | Weight: 12.7 Ounces | Length: 16.5” | Profile: 0.920” Diameter Target | Threaded: 1/2” X 28 | Rate of Twist: 1:16” - This new spiral flute barrel from...

Tactical Solutions X-Ring Performance Barrel fits Ruger 10/22 BlueChambered in .22 Long Rifle | Weight: 12.7 Ounces | Length: 16.5” | Profile: 0.920” Diameter Target | Threaded: 1/2” X 28 | Rate of Twist: 1:16” - This new spiral flute barrel from...

Tactical Solutions X-Ring Performance Barrel fits Ruger 10/22 BlackChambered in .22 Long Rifle | Weight: 12.7 Ounces | Length: 16.5” | Profile: 0.920” Diameter Target | Threaded: 1/2” X 28 | Rate of Twist: 1:16” - This new spiral flute barrel from...

Upgraded 10/22 Receiver Cross PinsThis (2-Pack) includes: Upgraded pins won’t fall out when working on your gun Steel pin is highly durable Spring-loaded ball detent holds pin in place securely, installs easily If you’ve upgraded your...

By Popular Demand...M1 Carbine Sight Set for Ruger 10/22 Rifles- Replica M1 Carbine sights made to fit the Ruger 10/22. Fully functional windage and elevation adjustment. Rear sight fits 10/22 scope mounting holes. Front sight slips over the front sight...

Volquartsen Bolt Tune-Up Kit for Ruger 10/22 - Corrects most cycling issues with a simple parts swap.- Upgrades your 10/22 firing pin and extractor to eliminate light hits and stovepipes. The Volquartsen Bolt Tune-Up Kit for the Ruger 10/22 (22 LR model...