Apertures for TechSights 200  These new one-piece apertures for the TechSights 200 peep sight allow you to change peep-hole sizes to suit the available light where you're shooting. It works much like a camera aperture in that, the smaller the hole,...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 6 inch LLV and LLV-4 and...

EABCO CVA Scout PeepRib Set (Includes Front Sight)- Our original PeepRib Aperture Sight is now available for the CVA Scout centerfire rifle. The PeepRib combines a precision aperture rear sight with a scope mounting base. You can position a...

HIVIZ® LiteWave® Front and Rear Sight Combo for Ruger 10/22 rifles. - Fast sight acquisition is what these HiViz sights are all about. The fiber optic LiteWave Lite Pipes gather and concentrate ambient light so that it shines bright out the end.....

Ruger MK I, II, III & IV Fiber Optic Adjustable Rear Sight Improve the performance of your Ruger MK I, II, III and IV with the new adjustable rear sight. Our bright and fully adjustable rear sight will enhance your confidence and shooting experience...

By Popular Demand...M1 Carbine Sight Set for Ruger 10/22 Rifles- Replica M1 Carbine sights made to fit the Ruger 10/22. Fully functional windage and elevation adjustment. Rear sight fits 10/22 scope mounting holes. Front sight slips over the front sight...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 4.5 inch LLV...

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Ruger MK II/III/IV Picatinny Scope Mount Rail by Majestic ArmsLow Profile Does Not Interfere with Iron Sight Picture!  Precision machined, true Mil-Spec Picatinny Rail for mounting a scope, red dot, or laser on your Ruger MK Pistol. Fits Ruger Mk I,...

TechSights .920 Barrel Adaptor - Fits Front Sight to .920 BarrelsOur TechSights 100 and TechSights 200 sight systems for the Ruger 10/22 include a front sight that fits the factory tapered 10/22 barrel. This new adaptor allows you to fit that same front...

ScopeRib III Sight System for Handgun Silhouette- Match grade, long range pistol sights combined with a scope mount so that you don't have to disturb the alignment of your sight system when using a scope to work up hand loads.- The ScopeRib III Sights...

PeepRib Aperture Sight for CVA Accura, Kodiak, Optima and Wolf Muzzle Loaders Fine tune your accuracy by combining a precision aperture sight with a Picatinny style scope mounting base. This Peeprib works with both old and new hole patterns. You can...

TechSights 200 Sight Set for Ruger 10/22   The TechSights 200 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the...

  The TechSights 100 Set for Ruger 10/22 Rifles includes front and rear sights, which are specifically designed to be used together. This system provides a peep sight at the rear, National Match post at the front, and approximately 7.5" more sight...

TC Encore PeepRib Picatinny Muzzleloader SightOur original PeepRib Aperture Sight for TC Encore, Pro Hunter, Triumph, Triumph Bone Collector, Impact and Omega combines a precision aperture sight with a scope mounting base. You can position a riflescope...

  The WGRS is an Aperture Sight that fits Thompson Center Arms Encore, Pro Hunter, Omega, and Impact. An aperture sight (aka peep sight), mounted as close to your eye as possible, removes a huge amount of aiming error by simply increasing the sight...

CVA Muzzleloader Front Sight .485 Height- One piece metal ramp front sight attaches with one 6-48 screw. Orange fiber optic makes it easy to see in low light and woods hunting. Fits a typical CVA .875" diameter muzzleloader barrel. This .485" height...

CVA Muzzleloader Front Sight .445 Height- One piece metal ramp front sight attaches with one 6-48 screw. Orange fiber optic makes it easy to see in low light and woods hunting. Fits a typical CVA .875" diameter muzzleloader barrel. DOES NOT WORK ON THE...

Patridge style target sight fits on 4.5'' Volquartsen LLV (Mk II/III) and LLV4 (Mk IV) Competition Pistol Uppers.

Bond Hooded Front Silhouette Sight by EABCO- Original Ralph Bond designed IHMSA Silhouette front sight manufactured by EABCO has a front post that's adjustable for width and height with a removable one inch tubular hood. This is the same sight that we...