Volquartsen Target Hammer Kit for the Ruger 10/22- The target hammer kit was designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer (Not for BX-Trigger). No stoning or fitting is required. Reduces trigger...

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...

Timney 49ER Ambidextrous Safety fits AR15- The Timney 49er is a 49 or 90 degree AR15 safety (Ambidextrous). It can be used in either the normal 90 degree or for ultra quick changes a 49 degree short throw for quick and easy manipulation. In addition,...

 The TANDEMKROSS “Thunder” Hammer for SW22® Victory™ is a drop-in replacement hammer that significantly reduces SW22® trigger pull weight. The “Thunder” SW22® Victory™ hammer is precision-machined from hardened S7 tool steel for improved...

Volquartsen Target Sear for Ruger® MK II™ and Mk III™- This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel.Does NOT Fit: Ruger MKIV Pistols 

Tandemkross "Victory" Trigger Replacement for Browning BuckmarkFeatures:Flat faced for better control and feelTextured Face for better grip100% Adjustable for pretravel and overtravelLightweight skeletonized designFits All Browning Buckmark Pistols - The...

Volquartsen Ruger MK IV® Accurizing Kit - Stnls TriggerThis complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Target Trigger with plunger and spring. It also comes with pretravel...

Ruger MKIV 22/45 Race Gun Kit Black- All of the most popular MKIV 22/45 Pistol accessories from Tandemkross, favorites in speed shooting sports like the "Rimfire Challenge" and "Steel Challenge". Here's what you get:1 "Halo" Charging Ring1 "Victory"...

Blast Shield Mag Disconnect Replacementfor Ruger Mark IV and Mark IV 22/45 Pistols.- This little replacement part shields the sear and hammer from debris, improves magazine alignment, and allows your MKIV to fire whether or not the magazine is inserted...

Volquartsen VC2AK-S-ST Accurizing Kitfor Ruger Mark II, III, and 22/45, Silver/Stainless Trigger- Drop In Target Grade Accurizing Kit with silver extended bolt release and stainless trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary...

Volquartsen VC2AK-S Accurizing Kitfor Ruger Mark II, III and 22/45, Silver/Black- Drop In Target Grade Accurizing Kit with silver extended bolt release and black trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary slightly due to factory...

Tandemkross "Victory" Trigger Replacement for Ruger Mk IV Silver Features:

Tandemkross "Victory" Trigger Replacement for Ruger Mk IV Silver Features:

Volquartsen Ruger MK IV® Accurizing Kit This complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Black Target Trigger with plunger and spring. It also comes with pretravel and...

Tandemkross "Victory" Trigger, BlackReplacement for Ruger Mk III and Mk IV 22/45Features at a Glance:Flat faced for better control and feel100% Adjustable for pretravel and overtravelLightweight skeletonized designFits MKIII or MKIV, Original or...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

CNC-Machined Disconnector for MK IV This MKIV Disconnector is CNC-Machined from 416 stainless steel (the factory disconnector is a sheet metal stamping). The machining process allows several design changes to the the way the disconnector functions. We...

TC Encore Pro Hunter or Contender Trigger Job ServiceExpertly Performed by an Experienced, Skilled EABCO Gunsmith Sear Engagement Shortened - Reduces Trigger Movement Before The Shot Sear Engagement Polished - Gives Consistant, Predictable Feel, Shot...