EABCO Picatinny Scope Mount fits TC Encore Pro Hunter 12 Ga. BarrelsPrecision Machined from Aircraft Grade Aluminum BilletRigid and Straight to Enhance Accuracy PotentialMilspec Picatinny fits Weaver and Picatinny Rings and AccessoriesSuper Strong...

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

Remington 700 Accuracy Recoil Lug - Bright Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN...

Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

Remington 700 Accuracy Recoil Lug - Matte Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Remington 700 Accuracy Recoil Lug - Bright Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Remington 700 Accuracy Barrel® 6mm Creedmoor 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

JP Competition AR10/AR308 CompensatorDo-It-Yourself Installation, Replaces 5/8x24 Flash Suppressor- Developed and evolved from YEARs of competitive shooting, the JP Competition Series Compensator has reached an optimum level of effectiveness while...

DeltaPoint Mount for SIG Auto Pistols Mount attaches Optima, Firepoint, Jpoint and Leupold Delta Point Red Dot Sights to SIG Auto Pistols. Easy to install, light weight, aluminum mounting base for DeltaPoint and other red dot sights.  Fits: Leupold...

Barrel Shims fit T/CR22 and Ruger 10/22 Barrels- Our Barrel Shims for the Thompson Center T/CR22 Rifle allow you to mount ANY Ruger 10/22 compatible replacement barrel onto your T/CR22* Just slip the shims onto the barrel shank. Mount the shank into your...

EABCO Remage Barrel Nut – Precision Fit for Remington 700 Pre-Fit Barrels The Remage Barrel Nut is at the heart of our re-barreling system for the Remington 700, allowing it to use a pre-fit barrel system without modifying the receiver. This nut...

T/C Encore 6.8 Rem SPC Extractors are Tool Steel by EABCO   The 6.8 Rem SPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6.8 Rem SPC as well as 224 Valkyrie. Our extractors are precision machined from tool steel billet...

T/C Encore 450 Bushmaster Extractors are Tool Steel by EABCO   The 450 Bushmaster extractor is used for TC Encore and Pro Hunter barrels chambered in 450 Bushmaster. Our extractors are precision machined from tool steel billet. We...

AR15 Tungsten Buffer Weights 3-Pack- It's easy to fine tune your bolt speed for optimum performance and reliability using our Tungsten Buffer Weights. Your AR15 recoil buffer has three STEEL weights inside. You simply replace the steel weights with EABCO...

T/C Encore 45-70 Govt Extractors are Tool Steel by EABCO   Replacement extractors fit Thompson Center Encore/Pro Hunter barrels chambered for 45-70 Govt. The T/C factory extractors are molded and then machined. Our replacements are...

Blue TC Encore Accuracy Barrels® by EABCO17 Remington Fireball 1:9, Standard Model, Match Grade BarrelTC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail,...

Universal Thread Protectors- Thread protectors with the standard AR15 1/2x28 and AR308 5/8x24 thread patterns and available in three outside diameters. Precision machined from carbon steel and finished in Mag Phosphate black. A raised gripping portion...

JP Competition Series AR308 CompensatorDo-It-Yourself Installation, Replaces 5/8x24 Flash Suppressor- Developed and evolved from YEARs of competitive shooting, the JP Competition Series Compensator has reached an optimum level of effectiveness while...

JP Low Profile, Non-RailedClick Adjustable AR Gas Block System .936 Bore- Allows click adjustable tuning the AR15/10 bolt velocity to reduce bolt slamming, manage recoil, and increase accuracy potential. The JPGS-8D model gas block is our low profile...

Blue TC Contender G2 Accuracy Barrel® by EABCO6.5mm BRM 1:8, Standard Model, Match Grade BarrelsTC Contender/SSK-50/G2 Accuracy Barrels® fit the TC Contender and G2 Contender frames. Manufactured by E. Arthur Brown Company with special...