Warne Maxima Scope Mounting Base for TC Encore, ProHunter and OmegaWeaver Style, Low Profile, Tough and Solid  Warne Maxima Scope Bases are all steel, rigid and accurate one piece scope mounting bases. Finished in Matte Black to match the Warne...

Rifle Basix L-1K Hunting Trigger for Remington 700 Black- Hunter Grade replacement Trigger includes a new safety and bolt stop release. Adjusts from 1.5-4 lbs. and fits Remington 700, 721, 40X, etc. Rifle Basix after-market triggers feature state of the...

350 Legend Magazine fits AR15, 5 Round by ASC - This 350 Legend Magazine and our 350 Legend Barrel are just about all you need to convert your 223/5.56 AR15 rifle to shoot 350 Legend ammunition for Deer Hunting (or other big game). The 5-Round magazine...

T/C Contender 357 Magnum Extractors are Tool Steel by EABCOThese 357 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 357 Magnum, 357 Maximum, 38 Special, 7mm SuperMag, and any other cartridges that have the...

Push Buttom QD Sling Swivel fits AR-15, Oryx, etc. This is our standard QD sling swivel with low profile push-button release. It fits the standard .365" QD swivel ports on AR-15s and many chassis stocks like out Oryx. It's made of solid steel, accepts...

T/C Contender 22 Hornet Extractors are Tool Steel by EABCOThese 22 Hornet extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Hornet cartridge. It also works with many other cartridges that have the same rim. Our...

T/C Contender 6.8 Remington SPC Extractors are Tool Steel by EABCOThese 6.8 Rem SPC extractors are used for TC Contender and G2 Contender barrels that are chambered for the 6.8 Remington SPC cartridge. It also works with other cartridges that have the...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

Volquartsen Mk IV and Mk IV 22/45 Competition KitAlso Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

T/C Contender 35 Remington Extractors are Tool Steel by EABCOThese 35 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 35 Remington cartridge. Our extractors are precision machined from tool steel billet...

Volquartsen Target Hammer Kit for the Ruger 10/22- The target hammer kit was designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer (Not for BX-Trigger). No stoning or fitting is required. Reduces trigger...

Remington 700 Accuracy Barrel® 6mm BR Norma 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Remington 700 Accuracy Barrel® 243 Winchester 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Remington 700 Accuracy Barrel® 260 Remington 1:8 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Remington 700 Accuracy Barrel® 223 Wylde 1:7 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI 223 Wylde is National Match and fits 223 Rem as well as 5.6 NATO Easy Installation and Headspacing with Remage Barrel...

Remington 700 Accuracy Barrel® 308 Winchester 1:12 Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length, Tapered to .800" Muzzle,...

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...

Jard 3596 Set Trigger fits Remington 700 3 lb. - A true SET trigger just like the old Sharps rifles. It comes pre-set for a standard 3 lb. trigger pull... But when you want a super light pull, you just push the trigger forward until it clicks... This...

Jard 3593 Set Trigger fits Remington 700 2 lb. - A true SET trigger just like the old Sharps rifles. It comes pre-set for a standard 2 lb. trigger pull... But when you want a super light pull, you just push the trigger forward until it clicks... This...

Jard 4626 Trigger fits Savage 10/110 Series Rifles 13-18 oz. Top Bolt Release- JARD's remarkable 3-Lever System brings exceptional trigger performance to Savage centerfire rifles (see the list of compatible models below). Designed to replace the factory...