Push Buttom QD Sling Swivel fits AR-15, Oryx, etc. This is our standard QD sling swivel with low profile push-button release. It fits the standard .365" QD swivel ports on AR-15s and many chassis stocks like out Oryx. It's made of solid steel, accepts...

T/C Contender 22 Hornet Extractors are Tool Steel by EABCOThese 22 Hornet extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Hornet cartridge. It also works with many other cartridges that have the same rim. Our...

T/C Contender 6.8 Remington SPC Extractors are Tool Steel by EABCOThese 6.8 Rem SPC extractors are used for TC Contender and G2 Contender barrels that are chambered for the 6.8 Remington SPC cartridge. It also works with other cartridges that have the...

T/C Contender 223 Remington Extractors are Tool Steel by EABCOThese 223 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 223 Remington cartridge. It also works with many other cartridges that have the...

Volquartsen Mk IV and Mk IV 22/45 Competition KitAlso Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

T/C Contender 35 Remington Extractors are Tool Steel by EABCOThese 35 Remington extractors are used for TC Contender and G2 Contender barrels that are chambered for the 35 Remington cartridge. Our extractors are precision machined from tool steel billet...

Volquartsen Target Hammer Kit for the Ruger 10/22- The target hammer kit was designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer (Not for BX-Trigger). No stoning or fitting is required. Reduces trigger...

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...

Jard 3596 Set Trigger fits Remington 700 3 lb. - A true SET trigger just like the old Sharps rifles. It comes pre-set for a standard 3 lb. trigger pull... But when you want a super light pull, you just push the trigger forward until it clicks... This...

Jard 3593 Set Trigger fits Remington 700 2 lb. - A true SET trigger just like the old Sharps rifles. It comes pre-set for a standard 2 lb. trigger pull... But when you want a super light pull, you just push the trigger forward until it clicks... This...

Jard 4147 Trigger fits Savage 10/110 Series Rifles w/Bottom Bolt Release, 7-12 oz - JARD's remarkable 3-Lever System brings exceptional trigger performance to Savage centerfire rifles (see the list of compatible models below). Designed to replace the...

Jard 4626 Trigger fits Savage 10/110 Series Rifles 13-18 oz. Top Bolt Release- JARD's remarkable 3-Lever System brings exceptional trigger performance to Savage centerfire rifles (see the list of compatible models below). Designed to replace the factory...

Jard 4625 Trigger fits Savage 10/110 Series Rifles 7-12 oz.- JARD's remarkable 3-Lever System brings exceptional trigger performance to Savage centerfire rifles (see the list of compatible models below). Designed to replace the factory trigger on most...

Jard 4510 Trigger fits Savage A17/A22 Magnum and Gives 2.5 lb Pull Weight- At last there's a replacement trigger for the remarkable Savage A17! The JARD Savage A17/A22 Trigger System brings JARD’s exceptional trigger performance to the Savage A17/A22...

Jard 4509 Trigger fits Savage A17/A22 Magnum and Gives 2 lb Pull Weight- At last there's a replacement trigger for the remarkable Savage A17! The JARD Savage A17/A22 Trigger System brings JARD’s exceptional trigger performance to the Savage A17/A22...

Thread Protector fits AR15 HBAR Contour 1/2 x 28 Stainless- Protect and beautify your HBAR muzzle threads with this beautiful knurled stainless thread protector. Standard 1/2 x 28 thread with a length of 5/8th inch and .740" diameter, it fits all EABCO...

Remington 700 Accuracy Recoil Lug - Bright Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN...

Remington 700 Accuracy Recoil Lug - Matte Black  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they CAN be...

Remington 700 Accuracy Recoil Lug - Matte Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...

Remington 700 Accuracy Recoil Lug - Bright Stainless  Replaces Remington recoil lug with a precision machined, parallel ground, oversized recoil lug for strength, alignment, rigidity, and accuracy. Remington factory recoil lugs aren't bad but they...