Shop by Model

Volquartsen TL Rear Sight for Ruger Mk II/Mk III/Mk IV, and LLV  Precision-machined to ensure accurate, repeatable click adjustments for windage and elevation. No fitting required, uses factory dovetail, locks in place with two set screws. Made of...

Hogue AR-15 Free Float Hand Guard 7'' w/Overmolded Rubber in Black or Ghillie Green- This is a 12.5'', Free Floating, precision machined, aluminum hand guard for your AR-15... It gives your AR-15 a a very high quality look and...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Volquartsen SureStrike Firing Pin for Ruger MK I, II, III and IV (Including 22/45)   This SureStrike firing pin is designed to eliminate light strikes on the Ruger MK I, II, III and IV pistols (including 22/45). Machined .004" wider than...

Volquartsen Machined Disconnector for Ruger Mk II/III PistolsThis new Volquartsen disconnector is CNC Machined for a better fit and function over the stamped factory disconnector.  The additional width of this new disconnector gives increased...

Volquartsen 10/22 Stock Take-Down Screw  This is a precison Allen Head stock screw for your Ruger 10/22 Stock. The Allen head serves two purposes. First, it doesn't get buggered up like slotted head screws. Second, it fits torque wrenches so you can...

Hogue Overmolded Ruger 10/22 StockOverMolded Stocks are constructed by molding a super strong, rigid fiberglass reinforced skeleton or "insert" that precisely fits the guns' action. This rigid skeleton is then OverMolded with a durable but soft synthetic...

Volquartsen Target 22 Style Frame fits Ruger MKII and MKIIIA Complete Aluminum Lower Frame Replacement... Includes Volquartsen Accuracy System Internal PartsOur Volquartsen Custom Target Frame is CNC machined from aluminum alloy. Weighing only 7.1 oz, it...

Ruger MKII/MKIII 22/45 Magazine Base Pad- Add some extra seating power to your Ruger Mark II & Mark III 22/45 magazines and customize the looks and handling of your gun at the same time! These 22/45 Magazine Bumpers add some length to your magazines...

EABCO Ruger 10/22 Scope MountPrecision Machined Weaver Style Scope Mounting Base   Our EABCO Ruger 10/22 Scope Mounting Base is precision machined to optimize the base for the very best ring engagement, alignment, and rigidity. No molding or...

Universal Shotgun Forend Screw Set for Encore and Pro HunterT/C Shotgun forends use slightly different screws for 20 ga. and 12 ga. If you have lost one or both screws, this kit will get you back up and running. This kit includes one shorter screw 0.75",...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...

- This Ruger 10/22 Handguard installs on 10/22 rifles with the standard factory (tapered) contour barrel. A retainer clip on the underside of the handguard snaps over the barrel and holds the guard securely in place. Vents help keep your barrel cool. Full

Volquartsen Forward Blow 10/22 Compensator1/2x28 Threads Fit Volquartsen, EABCO, and Tactical Solutions Barrels   Volquartsen's "Forward Blow" 10/22 Compensator is designed to stabilize the muzzle while directing noise away from the shooter. It has...

Volquartsen Laminated Right Hand Target Grips for Ruger MkIII Laminated Target Grips by Volquartsen for the Ruger Mk III (will not work on the 22/45 series) features:ThumbrestHeelrestFinger grooves. Designed to give the shooter a relaxed, steadier...

Pro Hunter "FlexTech" Muzzle Loader Forend Screws and Washers The TC Factory Pro Hunter "FlexTech" forend for muzzle loaders has two screws of different length (2 washers also included). If you've lost one or both screws or washers, this kit supplies...

Speed Trigger Fits Ruger Mk II and MK III Steel Frames Plastic Frames. Longer trigger with smooth contoured face gives better trigger control. Over-travel adjustment screw gives clean let off. Precision machined to close tolerances... Specifically to fit...

Choate Folding Stock for the Original T/C Contender  The Original Contender/SSK-50 folding stock is the answer for contender users that want a small compact rifle that can be easily stored and made ready to shoot in just a second. With an all steel...

Increase your fire power 100% with these Magazine Connectors (magazines not included). Constructed of two steel plates on front and back and a plastic filler block in the center. This superior design has several advantages. Both magazines point upward...

AR15/M16 Rail Cover for Railed Handguard or Forend. This rail cover is designed to fit all Mil-Standard M1913 picatinny rails. Black.

The Remington 870 Side Folding Stock must be used with the minimum length forend, which is included with Stock. The stock is made of 4140 steel, fiberglass filled plastic and come with a 3/4" recoil pad and sling loops.

AR-15 Front Sight Adjustment ToolAdjusts Elevation on Military A2 Model Front Sights  This 4-prong front sight tool is designed to adjust the A2 front sight found on the AR-15, M16, and M4. It is machined from steel and has a black zinc finish to...

Military Grade Ruger 10/22 Bullpup Stock- Styled almost identical to the FN P90 Bullpup, this 10/22 Bullpup Stock is just as tough and just as precisely made... Install it on your Ruger 10/22 and it looks, feels, and operates almost identical to the...

Savage Thumbhole Varmint Stock for Center Feed Blind MagazinePillar Bedded SA Rifle Stock fits Savage 10/11/12/14/16 with 12FV barrel channel... - Shade Varies  Fits CENTER FEED blind magazine rifles (NOT Stagger feed). Designed for accuracy in...

Pre-Bent Gas Tube for AR-15 Carbine Length Forends   This pre-bent gas tube is required when using Hogue AR-15 Carbine Length Free Float Forends. The internal dimensions of a Hogue Carbine Length Forend are restricted somewhat and this requires...

Hogue AR-15 Free Float Hand Guard7'' w/Knurled Aluminum Gripping Area, Black- This is a 7'', Free Floating, precision machined, aluminum hand guard for your AR-15... It gives your AR-15 a a very high quality look and feel. Free floating eliminates hand...

Hogue AR-15 Free Float Hand Guard 12.5'' w/Overmolded Gripping Area, Ghillie Green- This is a 12.5'', Free Floating, precision machined, overmolded aluminum hand guard for your AR-15... It gives your AR-15 a a very high quality look...

TC Encore Factory Style Camo Laminate Stock SET - Shade Varies  Custom designed Standard stock set for the TC Encore. This is a complete SET for the TC Encore rifle. Includes the Camo Laminate Standard Buttstock and Camo Laminate Heavy Rifle...

Choate Tactical Custom Savage Stock  This stock has a full length bedding block, a rail on the bottom of the forend to attach a bipod, and sling swivels on both sides. It also has a custom machined aluminum cheek piece of 6061 T6 with a .750 inch...

The Remington 870 M4 telescoping stock is the M4 stock with heavy duty tube designed to take the recoil of 3 1/2 inch 12 ga. Length of pull is from 11 1/2 -15 inches. The stock has 6 different places for sling attachment, including a flush cup for...

There are several advantages to having a Remington 870 12 Ga. Pistol Grip Forend. By holding the gun in a more natural position, it is easier to control and aim. It also protects the shooter's hand from slipping off the forend during rapid fire. These...

The Remington 870 top folding stocks make an excellent compact package. These stocks are made of solid cast steel with plastic over molded around it. This stock is operated with a simple push of a thumb button to lock it in either the open or closed...

Choate Machine & Tool's MK5 Remington 870 Conventional Stock features a new spacer system which was originally designed for the police for use with body armor; however, they work great for the hunter and recreational shooter as well. These stocks...

Remington 870 Magazine Extension Tubes 12 ga. Increase the fire power of your shotgun with a magazine extension kit. These kits are constructed of solid blued steel and come with 1 Magazine Extension - (6,7,8, 9 or 10 shot), 1 Base Clamp, 1 High...

This forend fits Remington Wingmaster and Express mod. 870 shotguns in 2 3/4 and 3 inch. Choate Synthetic Forends go great with all stocks. Made of fiberglass filled plastic, they look good and will last a lifetime.

The Mark 5 buttstock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. One-handed firing is also much easier. The stock is made of tough fiberglass filled plastic and comes with a soft 1" rubber recoil pad and a quick...

If you are looking for a less expensive solution to making your shotgun a tactical entry or home defense weapon, then we have the forend for you. This forend kit includes a forend with pre-drilled holes and a 1-1/2 inch piece of picatinny rail. To attach...

Choate M4/AR15 Stock for Encore and Prohunter   A solid, military grade M4 pistol grip and buttstock for the T/C Encore and Pro Hunter. Over molded metal construction is rigid and tough. Attaches to your Encore with a single grip bolt. This stock...

Choate Tactical Stock for Savage Version II Fits Detachable Mag Rifles Where the Latch is on the Magazine Full length bedding block (see cutaway picture) Fits Detachable Mag Rifles where the latch is on the mag Adjustable butt spacer system to adjust...